|
[China]
Trade Verify
Address: NO 123 Suzhou Dadao East Road Suzhou Jiangsu China
Contact name:Tina
Suzhou Kiande Electric Co.,Ltd. |
|
Verified Suppliers
|
|
|
Fast Die Change Hydraulic Copper Busbar Punching Machine
Features
Only save power: 10W, rated output force: 120KN, good stability,
the output force change is only ±20Kg force within the 20mm boost
stroke range, the equipment has high working efficiency, five to
ten times faster than ordinary hydraulic presses . Take the
step-down configuration as an example, it can complete about forty
cycles per minute. And the speed can be easily adjusted, the
pressure can be easily adjusted, there is no requirement for the
height of the mold, at any position, any position in the pressing
process senses the workpiece and starts to expand, and because of
the unique soft in place, the workpiece and the There is no damage
to the mold and it is immediately converted into a stable output of
static pressure.
Equipment data on digital copper bar punching machine
| No. | Parameters |
| Equipment Code | KD-YYJ-40(50)T |
| Bending Type | Pneumatic and hydraulic |
| Pressure | 40T/50T Maximum 80T |
| Mold | Easy To Change |
| Table Size | 450mm*340mm |
| Control Type | Digital Type |
| Pneumatic Supply | 0.6MPa |
| Power | 220~230VAC 80W |
| Size Of Equipment | L0.68m*W0.58m*H2.6m |
Function introduction
Digital bus bar punching machine is used to punch the two ends of busbar in one time to guarantee parallelism between busbar profile and conductor. This parallelism ensures the reliable connection between conductor and joint which can control joint temperature rising. Key point is that machine can adjust the rebound coefficient according to conductor’s material and width. Rebound coefficient varies by bending or different conductor width and this kind of adjustment can guarantee the parallelism.
