JIAXING VIIPLUS INTERNATIONAL TRADING CO.,LTD |
|
CC483K Tin Bronze EN Casting Copper Alloy Bearings CuSn12 Sleeve & Flange graphite plugged Bushings For Hydraulic Components made to order from china,for bronze bushing DISTRIBUTOR
Chemical Composition mass/% | |||||||||
---|---|---|---|---|---|---|---|---|---|
Cu | Sn | Al | Fe | Mn | Ni | Pb | Si | P | Zn |
85.0-88.5 | 11.0-13.0 | 0.01 | 0.2 | 0.2 | 2 | 0.7 | 0.01 | 0.6 | 0.5 |
Mechanical properties | |||
---|---|---|---|
Tensile strength Mpa(Min) | Yield strength MPa(Min) | Elongation % | Brinell hardness(HB) |
280 | 150 | 5 | 90 |
1,In Chemical Composition, Single values represent maximums.
2,Mechanical performance of hardness value is only for reference
Hydraulic Component Bronze Bushings The company has developed metal and plastic self-lubricating rolling bearings suitable for high load and high speed under the condition of fluid lubrication, which are widely used in gear pump, plunger pump, vane pump, compressor, cylinder and other industries.
Bearing forms made to order: standard forms in special dimensions, thrust washers, flanged thrust washers, half-bearings, special shapes obtained by stamping or deep drawing, customized bearing designs
Flanged Bearings non-standard Manufacturer sizes to suit specific customer requirements,have been developed for high load, low speed applications and are made of rotational cast high-strength bronze C86300/C86200/C95400/C93200 ALLOY using a specially formed graphite plug as lubricant.
Solid Bronze Metallic Plug Graphite Cast Bronze Bearings Solid Bronze Lubrication
CUSN12 Bronze Bushings
CUSN12 is a high tin tin bronze commonly used for high-load gear, turbine, and
bearing bushing.
High hardness, excellent wear resistance, not easy to die, good
casting performance and cutting, in the atmosphere and fresh water
Good corrosion resistance.
Cast Bronze Bearing with Graphite Plugs Typicai applicaton
The product is widely used on consecutive casting and rolling machines, mine-exploiting equipments, ships, steam engine, etc.Hydraulic Cylinder Casting Bronze Flange Bearing With Solid Lubricant
VSB-50 Solid Lubricating Bearing is produced by strengthening brass
that has good physical performance and good capability for casting.
What's more, the brass material has pretty good anti-erosion
abitity in air, fresh water and sea water. The surface is regularly
and finely machined with sockets in which particular solid
lubricant is filled. The product is widely used on consecutive
casting and rolling machines, mine-exploiting equipments, ships,
steam engine, etc.
Characteristics
with Solid Graphite Lubrication. Various material specifications,
standard and special shapes are also available
VSB-50 Solid lubricating bearings
1. May work without any ol for long period
2. Extremely high load capacity, good anti-wear and lower friction
3. Particularly appropriate for low speed and high load
4. Suitable for reciprocating, oscillation or intermittent motion
where oil film is hard to be formed
5. Good chemical resistant and anti-corrosion characteristics
6. Can b€ used in wide range of temperature from -40℃-+300℃
VSB-50 material is made of strong cast bronze based metal with special solid lubricants embedded. The base metal withstands high load and the solid lubricants provide self-lubrication. The bearing shows excellent performance without pre-lubrication under conditions of extreme high/low temperature with low speed. This material provides a maintenance-free bearing solution, particularly for high load, intermittent of oscillating motion.
Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Sliding plates
Widely used in hydraulic pneumatic, forging machine tool industry, plastics machinery, lifting transportation machinery, port machinery, office, gym machinery, textile machinery, food packages, filling machinery, chemical machinery, printing and packaging, paper making machinery, automobile, railway vehicle, shipbuilding industry, machinery, metallurgical machinery, engineering machinery, etc.