(1) The left motor is crush motor;
(2) the right motor is classfifier motor.
(3) It adopts a small screw feeder, make sure feed speed is even and controllable.
|
[China]
Trade Verify
Address: No.291,South street,Zhutang town, Jiangyin, Jiangsu province,China.
Contact name:Qian
Jiangyin Brightsail Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
This machine is consisted of main motor,auxiliary motor,and electrical control cabinet with the capabilities of winnowing,non-sieve or mesh,equality of granule size,and continuous processing etc. it meets the international advanced level and is suitable for the material grinding by the trade of pharmaceutics,chemical and foodstuff etc.
Model | BSP-350 | BSP-450 | BSP-500 | BSP-750 |
Capacity(kg/h) | 20-200 | 40-500 | 60-800 | 120-1800 |
Input granule size (mm) | <15 | <15 | <15 | <15 |
Out powder size (mesh) | 60-2500 | 60-2500 | 60-2500 | 60-2500 |
Crush motor power (KW) | 7.5 | 15 | 22 | 45 |
classifier motor (KW) | 1.1 | 2.2 | 7.5 | 11 |
Feed motor power (KW) | 0.37 | 0.75 | 0.75 | 1.1 |
Blower (KW) | 5.5 | 7.5 | 18.5 | 37 |
Rotary valve (KW) | 0.75 | 0.75 | 0.75 | 1.1 |
Cutter rotating speed (rpm) | ~6500 | ~5600 | ~4400 | ~3100 |
Classifier impeller rotating speed (rpm) | 4000 | 4000 | 3500 | 3000 |
Overall size (L*W*H)(mm) | 5000*1400*2800 | 5400*1500*2900 | 6600*2000*3600 | 9800*2700*4900 |
Weight(kg) | 1600 | 1800 | 2300 | 3100 |
1) Simple structure ,easy in installation and maintenance.
2) Adopting advanced world famous brand motor,electric
parts,bearing and operation parts.
3) No dust during production, and dust can be collected in dust
collecting box.
4) No need screen, particle size can be changed by change speed;
particle size varies from 80 to 500 mesh.
5) Around mill chamber and bearing, there is water-cooling jacket
to cool the machine.
(1) The left motor is crush motor;
(2) the right motor is classfifier motor.
(3) It adopts a small screw feeder, make sure feed speed is even and controllable.
Cutter inside mill chamber
Work method:Material enters the mill chamber via screw conveyor where it is
sheared and milled by fast-rotating blades.The powder passes the
guide ring and enters the classifier chamber. As the classification
wheel is in rotation,both air force and centrifugal force act on
the powder. As the particles whose diameters are greater than the
critical diameter (diameter of the classification particles) have a
greater mass,they are thrown back into the mill chamber to be
ground again,while the particles whose diameters are smaller than
the critical diameter enter cyclone separator and dust-collecting
box.
(1) Cyclone can seperate dust from powder(granules)
(2) Rotary valve make powder discharge speed even
Rotary valve is also made of stainless steel
and to clean it and dismantle is convinient.
Pulse Dust Collecting box
(1) Dust is collected inside the dust collecting box.
(2} Inside box, there are many dust collecting bags and the bag
frames are also made of stainless steel and can be disassembled
easily.
(3) With pulse-jet cleaning, dust can be collected very
conviniently.
TO MAKE SURE BETTER QUALITY
1) We use motor from ABB/Siemens/WEG
2) We adopts electrical control parts from Schneider/Delixi
3) We use bearings from SKF
* Inquiry and consulting support with 24 hours
* Sample testing support.
* View our Factory.
* Instructing how to install the machine, insutructing how to use the machine.
* Engineers available to service machinery overseas.
