SS316 Fabrication Hot Liquor Tank Electric Temperature Control 8000L Hot Water Supply

8000L Hot Liquor Tank Fabricated By SS316 For Hot Water Supply

Hot tank water tank is used for hot water supply in brewing process. this steam heating hot water tank is suitable for different brewing process, flavor demands.

Making beer requires the use of a lot of hot water, often at very specific temperatures. We use 'strike' water to soak or 'mash' grain at very specific temperatures to release sugars and then later use 'sparge' water to rinse off the sugars. This where the Hot Liquor Tank (or HLT) comes in: It's our source of hot water that eventually becomes beer. In brewing terms, the hot water is called 'liquor', hence the name 'Hot Liquor Tank'. In case it is not obvious yet, brewing is full of all sorts of odd-ball terms just to make things more confusing for the new brewer.

We also use the HLT to maintain very specific temperatures as the grain is soaked or 'mashed'. This is done through a heat exchanging coil that sits in the HLT that's been given the fancy name of 'HERMS' (Heat Exchanged Recirculating Mash System) by brewers. We set the desired temperature on our control panel and as the grain is soaked in the Mash/Lauter Tun (MLT), the liquid or 'sweet wort' is pumped through this coil in the HLT to compensate for heat loss that occurs over time.

Our hot liquor tank fabricated by certified 304 stainless steel material for all tanks, with 100% TIG welded joints and seams with sanitary interior polish. All tanks use Tri-clamp connections, are designed for up to 14.7 PSI and tested at 30 PSI. We can custom fabricate any tank to meet your brewery’s space and height restrictions.

Details of Hot Liquor Tank

Standard Features

• Made by certified 304 stainless steel
• 100% TIG welded joints and seams with sanitary interior polishing
• Dimple plate jacket: 304 stainless steel, thickness 2mm /14 gauge
• Interior shell: 304 stainless steel, thickness 3mm /11 gauge
• Interior shell to finish pickled and passivated/mirror polish
• Exterior shell: 304 stainless steel, thickness 2mm /14 gauge
• Exterior surface to burshed, #4 finish or satin polish
• 50mm polyurethane foam insulation
• Glass level guage
• CIP inlet with spraying ball

​Technical Parameters

Contact us immediately to get latest specification and price of 8000L Hot Liquor Tank Fabricated By SS316 For Hot Water Supply