5BBL Customize Stainless Steel Hot Liquor Tank With Liquor Gauge Thermometer Ball valve Movable Wheels

5BBL Customize Stainless Steel Hot Liquor Tank With Liquor Gauge Thermometer Ball valve Movable Wheels

Brewhouse are custom-built to fit each brewer’s individual needs. Our staff works with you on everything from defining your optimal brewery layout, to designing the setup and size of your brewhouse and beer equipment hot liquor tank. Custom-piping? No Problem. Low ceiling or cramped quarters, there’s a design solution for that. Most importantly, every brewhouse is built with 304 Stainless Steel and uses ABB motors, so they are as durable and hard-working as you are. Further, every 20hl brewhouse goes through a comprehensive quality control inspection before it leaves our factory, where everything, including the inside of the piping, is inspected.

Standard Features:

side or top manway

sight tube with calibration strip

CIP sprayball and downtube

outlet w/ stainless steel butterfly valve

water inlet fitting

over-flow tube routed under tank

dimple plate glycol cooling jacket

thermowell with strain relief

coned top and bottom

stainless steel legs w/ height adjusters & pads

2" insulation

clad in stainless steel;

Effective volume:200L-10000L
Inner container: SUS304,Thickness 3mm, 2B finished.
Outer container: SUS304, thickness 2mm, Grind arenaceous.
Shell jacket: SUS304, thickness 1.5mm.
Insulation Material: polyurethane, thickness: 80mm.
Ribbon polished for the welded place.
Conical top/ Cylinder/ conical bottom/ shell jacket(one or two sections) / bottom jacket / insulation both on shell and bottom / with adjustable legs.
Connections:level interface/ steam Import and Export/ Pt100 interface/ top manhole / respirator/ Inlet/ Outlet.

We can supply different size of beer brewery equipments,Such as 50l/batch, 100L/batch, 200L/batch, 500L/batch, 1000l /batch, 2000L/batch, 3000L/batch, 5000L/batch; 1-2bbl, 3bbl, 5bbl, 7bbl, 10bbl, 15bbl, 20bbl, etc;

1. Be made of stainless steel 304. Brushed outer shell.
2. Working volume: 5BBL,
3. Φ2000*H3600
4. Thickness of insulating layer: 100mm, Thickness of inner body stainless steel: 3mm, outer shell is 2mm
5. Steam jacket
6. With liquid level meter
7. Rake plow/ Grain out door, Milled sieve plate; Grain washing round pipe; CIP rotary spray device
8. Top mounted manway with full glass, manway handles material is plastic; Top decorative funnel; light fixture with LED; thermo well;
9. Bimetal thermometer and temperature probe;
10. Bottom wort collect
11. Outer and Inner plate protection , and ribbon polished on all welds
12. All valves are stainless steel, which attaches with tri-clamps; NPT connect ports etc
13. With all matched valves and accessories.

Technology Parameters

1. Motors and pumps equipped in brewhouse and pipeline, their brand are 20hl brewery equipment hot liquor tank famous brand.
2. Round stainless steel manhole with sight glass, it is equpped in the top of brewhouse.
3. False plate is made on a complete stainless steel by CNC lathe, it is strong, filter fast and leak no any grist., and used in lauter tank.
4. First class sanitary sight glass, equipped in the pipeline of brewhouse.
5. plate heat exchanger, Suspension type, easy to disassembled and wash.
6. Pressure relief value with glass, clean and sanitation, It will have some pressure changes with the time went by, and it is easy to observe the wort status.
7. Rotating racking arm, used in fermentation tnak, and port on the cone with butterfly value, and it can get the beer from different place in the fermentation tanks.