Active Member
|
[China]
Address: Yideli Industrial Park, Jinghe 3rd Road, Jinghe, Dongxihu, Wuhan,China
Contact name:Cindy Chen
Hubei Yideli Light Industry Technology Co., Ltd. |
|
|
15BBL Customizable Conical Beer Fermenter For Brewery Fermentation Tank
Fermentation tank are made by SUS304 stainless steel , which meet
domestic and international food safety and hygiene standards, They
are cylindrical cone bottom tank , the cone is 54-72 degree . Their
externals are made by 2B stainless steel drawing board , connected
by welding . Their internals have a protective film by picking
passivation , and equipped with 80mm pulyurethane insulation , .The
tanks with dimple plate on cone and side , they are cooled by
glycol water or alcohol water . Single tank , single control .
Types: 100L-3000L , 1HL-300HL , 1BBL-300BBL
Other beer fermentation tank : Open FV , Single -wall FV
Control Method:Single tank, single control. Cooled by dimple plate jacket . Top
quick-open type pressure manhole; can cast dried hops (Brewing IPA)
Interior Tank: Stainless Steel 304, Thickness 2.5 mm
Exterior Tank:Stainless Steel 304, Thickness 2.0 mm
Heating area 1.4 m2;
Head: Φ700 dished head, Thickness 3mm;
Lower-cone: Stainless Steel 304, Thickness 3mm; cone base 60 degree(optional
54 degree)
Insulation layer thickness: 80mm, Polyurethane insulation;
Welding method: argon protection welding, plate protects weld slinging light band;
Temperature measurement method: intelligent temperature with temperature probe, centralized
display control;
Feeding method: feed from bottom, feed yeast from bottom;
Discharge method: the bottom has two pipes, the beer pipe is higher than the sewage
pipe;
| Function:Wort Fermentation and maturation | |
| Interior Shell:SUS304 Stainless Steel full welded,TH: 3.0mm; | |
| Exterior Shell:SUS304 Stainless Steel full welded,TH: 2.0mm; | |
| Insulation: Polyurethane-TH:80mm | |
| 100% TIG welding with pure argon gas shield | |
| Overall polishing to 0.4~0.6μm without dead corner | |
| Glycol Jacket: Dimpled plate on cone and side,thickness:2.5mm | |
| Cooling media: glycol water or alcohol water. | |
| Dry hopping port and safety valve on the top of tank | |
| Mechanical relief valve,Shockproof pressure gauge on CIP arm | |
| Stringent tank test with 3 BAR pressure(48Hours) | |
| Stringent Jacket test with 3 BAR pressure(48Hours) | |
| Rotating racking port,discharge port with butterfly valve | |
| Dished head and 60 degree cone bottom | |
| Inward type elliptical side manhole, with bevel edge | |
| Sanitary top mounted pressure manway | |
| CIP arm with 360° coverage rotatable CIP spraying ball | |
| Thermowell with high accuracy temperature sensor: PT100 | |
| Cooling control:Square table control,sigle tank single control. | |
| Top ladder hanger, in line with manhole vertically | |
| Welding seams brushed sand belt, welding points to be acid passivated, | |
| 4 heavy duty stainless steel legs with leveling footpads |
Accessories : Edible Tube , Inflatable Joint , Refrigerant Pipeline (Glycol) ,Insulation Pipeline
Please Note: mechanical pressure pressure regulating valve(optional
water-sealed), with positive and negative pressure breathing valve,
with a rotary washer. Cone bottom with removable multi-functional
combination interface. With some Leake sampling valve, other valve
instruments, accessories supporting.
Fermentation tank achieves to auto-control temperature and pressure
