Che Discharge System Pneumatic Conveying System Gate Flexible Manipulation

  Pneumatic gate,Its material is Q235 and 45 ect,used for che discharge system:

  Description: pneumatic valve is a powder, grain materials, grain and small pieces of material flow or throughput of the main control equipment, widely used in metallurgy, mining, building materials, food, chemical and other industries control traffic flow changes and cut off so quickly.

  Advantages:

  pneumatic valve has simple structure, flexible manipulation, light weight, no jam, fast cutting, especially suitable for all kinds of solid materials without viscosity and around 50 mm block, shape material, powder less than 10 mm, grain materials of transportation and flow control, the installation Angle without limit, easy to operate, can adjust scale. It is mainly used in building material, metallurgy, mining, power, light industry, food, food, chemical industry, glass industry such as the bottom of the library, library and import and export, and so on, is to control a great changing flow, frequent restart, the ideal equipment for cut off quickly.

  Work principle: pneumatic valve is mainly composed of frame, gate, screw, nut, etc parts, turn the handwheel by hand make screw with the screw nut and disc along the horizontal reciprocating movement, achieve the aim of opening and closing the gate.

  Dense Phase Pneumatic Conveying System:

  The dense phase pneumatic conveying system is applicable to the conveying of powder material as dry ash, cement, and industrial chemicals. It is a high efficiency, zero pollution conveying system, widely used in the material conveying in industry of power plant, building materials, and chemicals.

  For the reasonable fluidizing structure, the fluidizing state of the material is good, and the air consumption is obviously lower than the same function equipment. After years research and development, we have improved the fluidizing structure for many times to improve the working efficiency and lower the energy consumption.

  Because the air consumption is low and the material-air ratio is high, the material will have shunting movement in the pipe, achieving dynamic and static pressure conveying. Therefore, the flowing speed of the material is slow, the abrasion of the valve and pipeline is low, and the service life of the wearing part is long.

  If the fluidizing effect is good, air consumption is low, the material-air ratio will be high. The test has shown that when the equivalent distance is within 500m, the ratio will reach above 30Kg (ash)/Kg (air)