Durable Scraper Conveyor Tail Tensioning Mechanism Convenient Adjustment

  Tail tensioning mechanism,Its used for the Scraper Conveyor:

  Introduction:

  Tail scraper conveyor chain tensioner convenient adjustment, equipment to adapt the change of conveying material thickness degrees, scraper conveyor tensioning device adopts spiral spring tension, by two tail wheels, a tail shaft, and a pair of tensioning of screw and compression spring. Two tail bye sets on the shaft, in order to solve the two caused by error of sprocket sync problem; As a result of the action of the spring, the device can make the automatic traction chain tension adjustment. The device is particularly suitable for long distance, heavy load of the conveyor.

  The inspection:

  (1)  Scraper conveyor should be checking once per class during operation,: chain and sprocket meshing, ring link head, scraper chain and ring connection, etc.

(2)  Scraper conveyor should be a chain tension each class at run time,.

(3)  The oil cup add lithium grease to the bearing every week, each boiler repairs during the replacement of a new open the bearing cover grease, replacing grease to clean up the original grease. Reducer refueling operation for the first time a week after the new oil should be changed, and the internal smeary clean, every 3 ~ 6 months after the change note a new lubricating oil for reducer, running inside the reducer must keep oil in the oil level height (windows), shoulds not be too little or too much, added fuel oil can open the lid.

  MGB Series Embedded Scraper Conveyor:

Technical Parameter