Sparkling Water / Carbonated Beverage Filling Machine For Different Bottles

Carbonated beverage rising filling capping 3 in 1 machine

Features:

1. This DCGF Wash-filling-capping 3-in-1unit:

2. Beverage Machinery is used to produce Gas beverage (CSD)

3. The DCGF Wash-filling-capping 3-in-1unit:Beverage Machinery can finish all the process such as press bottle, filling and sealing,

4. it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency.

characteristics:

1). Compact structured, good-looking, easy to operate and highly automated.

2). Air conveyor is directly linked with feed-in starwheels, making it easier to change bottles without screws and conveyor chains.

3). Bottles are transferred in the manner of clamping neck. Bottles can be changed through some replacement of steel clamps, which instead of adjusting the height of machine.

4). Rinser-clamp which special design is strong and endurable, no contact with bottle-mouth, to prevent pollution.

5). Highly effective spraying nozzles equipped on the rinser-clamp can rinse every side of inner bottle and save water.

6). Accessories which contact with material are all made of stainless steel, no dead angles and easy to clean up.

7). Replacement between CO2 and O2 ensure almost no O2 in bottle, long filling pipe reduce O2 content to null

8). Valve on-off system is driven by hydraulic cylinder, which starts on bottle signals.

9). High-speed and highly accurate bottling valves ensure no loss of liquid at high speed.

10). Equipped with CIP clean-in-place.

Technical parameter

Machine pictures

inner look

Rinser

-Rotative rinsing turret one treatment, fixed nozzles, with grippers.

-The grippers take the bottles from the inlet star-wheel while they are still driven by the star-wheel, thus guaranteeing a safe grip.

-After the gripping, the bottle is turned upside down and cantred above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again.

Filler

-The star-wheels drive the bottles always "by the neck" through the rinsing, filling and capping steps. For the various types of bottle, it is easy to adjust the structure for the operator by our specialized design.

-Product bowl is to reduce the loss of heat.

-If the temperature is low than the setting value, the filling valves will stop and return the last beverage in filling valve to recycle tank and return to UHT again to sterilize with pump.

Capper

-Rotative capping turret, suitable to the application of screw plastic caps on PET bottles

-The fixed part consists of the cap hopper, the cap feeder with relevant motor and the cam actuating the capping heads.

-The heads are raised and lowered by the action of a follower that is riding on a shaped cam.

electrical system

final products

about our company

our main production lines:

1. bottling minereal/pure water production line;

2. barrel mineral/ pure water production line

3. bottling carbonated beverage production line (like coca cola);

4. bottling juice production line;

5. canning beverage production line;

6. glass bottle beer production line;

7. milk/tea filling&package line;

8. oil filling&package line;

our two workshops

certificate