Active Member
|
[China]
Address: North Industry Zone , Huanyang , Zhejiang Province, China
Contact name:Lisa Lee
Taizhou Huyang Reliable Machinery Co.,Ltd |
|
|
1. Controlled by MITSUBISHI touch screen computer. Operate
consistently and simply.
2. Pneumatic elements from FESTO (German) and SMC (Japan)
3. Energy-saving and environmentally friendly design. Mechanical
units are compact and rational.
4. Malfunction alert and diagnostic units allow easy maintenance.
5. Suitable for manufacturing a variety of PET bottles: mineral
water bottles, edible oil bottles, soda bottles, medicine bottle,
cosmetics bottles etc..
6. Oven can be made according the different preform requirements of
customers
• High safety. high speed with high efficiency.
• Manual saving, one man is enough for operation the machine.
• Stable performing with easy maintaining.
• Stable performance with advanced PLC.
• Japan Omron inspection sensor
• Adopt the new type double bend arm and the four rod-clamping
structure(won the patent): Cross direction; Middle mould board is
move parallel; the distance between two mold board is adjusted by
the chain wheel. Thus, the clamping force is very strong.
• Power saving design that can increase your profits
• Segregate type air controlling system, which is designed for
avoiding waste pollution
• The preforms feeds automatically by system and conveys automatically by conveyor.Automatic preform conveyer to save human cost.
• Introduce the FESTO air cylinder to avoid contamination and noise.
Technology datas of PET Bottle Blowing Moulding Machine
| Type | RM-2000 Plastic Bottle Making Machine | |
| Output | According to bottle type | 2000PCS/H |
| Bottle diameter | 20mm-100mm | |
| Bottle height | 50mm-350mm | |
| Bottle mouth diameter | 15mm-38mm | |
| Cavities | 4cavities | |
| Mold thickness | 200mm | |
| Mold effective area | 500*500mm | |
| Power | 380v 3Phase /220v 3Phase 50/60HZ | |
| Install power/actual power | 49kw/10kw | |
| Low pressure air compressor | 1.2m3/min 1.0MPa | |
| High pressure air compressor | 2.0m3/min 3.0MPa | |
| Cold dry machine | 2.0m3/min 3.0MPa 1set | |
| cooling water | Cooling water quantity | 15L/min |
| Main machine size | Length width height/weight | 2308*2058*1920mm/3600kg |
| Feed embryo machine size | Length width height/weight | 2000*950*2480mm/250kg |
PET material because of its exceptional performance, are generally used two-step molding process, by the preform injection molding machine to produce a 24-hour After cooling, the internal molecular structure of their re-arranged in an orderly manner, and blowing for the next step to create good conditions, so that more excellent blowing performance products. Such as the famous Coca-Cola Company is currently using this technology. Its production processes are as follows:
PET materials→Dryer→Injection machine(with Chiller)→Bottle Proferms
