Active Member
|
[China]
Address: North Industry Zone , Huanyang , Zhejiang Province, China
Contact name:Lisa Lee
Taizhou Huyang Reliable Machinery Co.,Ltd |
|
|
Mould: 6 cavity blowing bottle mould
| Container | Max.Container Volume | ltr | 2 |
| Max.Neck Diameter | mm | 50 | |
| Max.Container Diameter | mm | 110 | |
| Max.Container Height | mm | 320 |
Plastic Bottle 200-2000ML Processing Machinery Bottle Blow Molding Machine For Water Line
RM Series is Dual-purpose Automatic Blow Molding Machine
By structure optimization and technicial innovation, Cost-effective
PET bottle blowing machine.
RM series PET blowing machines are double-purpose blowing
machines. According to different tpes of preforms,users can choose
different operation method flexibly. For ordinary preforms, the
machine can runs full automatically with preform auto-loader. For
special preforms, they will be loaded manually. Its multiple use
and low cost will save you much.
RM series of blowing machines can produce different shapes of 0.33L
0.6L, 1.5L, 2L carbonated, mineral, pesticide, cosmetics,
wide-mouth and other plastic PET/PP containers.
Aadvantages of blowing machines:
Low rejection rate, high speed,stable running and easy operation.
| Technical Parameters | RM-6000D | RM-6000SF | |||
| Molding | Clamping Force | kg | 26000 | 26000 | |
| Clamping Stroke | mm | 125 | 125 | ||
| Stretching Stroke | mm | 450 | 450 | ||
| Bottom Stroke | mm | 40/70 | 40/70 | ||
| Cavity Spacing | mm | 120 | 120 | ||
| Number of Cavity | Cavities | 6 | 6 | ||
| Carriage Unit | pcs | 162 | 162 | ||
| Theoretical Output | bph | 5000-6000 | 6000-7200 | ||
Electrical System | Total Power | kw | 75 | 78 | |
| Heating Power | kw | 48×1.5KW=72 | 48×1.5KW=72 | ||
| Number of Lamp Layers | Layers | 8 | 8 | ||
| Air System | Operating Pressure | kg/cm2 | 7-9 | 7-9 | |
| Lower Pressure Air Consumption | ltr/min | 3000 | 2000 | ||
| Blowing Pressure | kg/cm2 | 20-30 | 30-40 | ||
| High Pressure Air Consumption | ltr/min | 4800 | 6000 | ||
| Chiller | Operating Pressure | kg/cm2 | 2-4 | 2-4 | |
| Temperature Range | ºC | 10-12 | 10-12 | ||
| Consumption | kcal/hr | 2000 | 3000 | ||
| Flow Rate | ltr/min | 350 | 350 | ||
| Main Machine | Main Machine Dimensions | mm(L*W*H) | 3700×2150×2150 | 3700×2150×2150 | |
| Main Machine Weight | kg | 5500 | 5700 | ||
Preform Loader | Perform Loader Dimensions | mm(L*W*H) | 2350×1350×2650 | 2350×1350×2650 | |
| Perform Loader Weight | kg | 550 | 550 | ||
Plastic Bottle 200-2000ML Processing Machinery Bottle Blow Molding Machine For Water Line
Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each
mechanical action, which will make the procedures turn into a state
of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive
the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and
mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links
to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to
make the air pressure diagram of the machine easier to understand.
