Taizhou Huyang Reliable Machinery Co.,Ltd |
|
Plastic Bottle Manufacturing Machines Description
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in the infrared pre heater.
4. High adjustability to enable the pre heater to preheat preforms
in shapes by adjusting the light tube and the length of the
reflecting board in the preheating area, and eternal temperature in
the pre heater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each
mechanical action , which will make the procedures turn into a
state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive
the action in stead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and
mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the Bottle Producing Machine.
8. Strong clamping force with high pressure and double crank links
to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to
make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance,
etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting.
15. Low rejection rate: less than 0.2 percent.
Full Automatic Bottle Blow Molding Machine With PET Preform Making 2000BPH Plastic Bottle
Item | General Infomation | |
Container | Theoretical Output | 2000pcs/hr |
Max.container volume | 2L | |
Max.neck diameter | 50mm | |
Max.container diameter | 110mm | |
Max.container height | 320mm | |
Number of cavity | 2 Cav | |
Electrical System | Total Power | 30kw |
Use Power | 25kw | |
Air System | Working Pressure | 1.0Mpa |
Low Pressure Consuming | 1600L/min | |
Blow Pressure | 20-30kg/m3 | |
High Pressure Consuming | 1600L/min | |
Chiller Water | Opreating Pressure | 0.3-0.5Mpa |
Temperature | 10-12°C | |
Flow Rate | 130L/min | |
Machine | Machine Dimension | 1.95*1.85*2.1m |
Machine Weight | 1900kg | |
Feeding Machine Dimension | 2.15*1.45*2.45m | |
Feeding Machine Weight | 450kgs |