Battery Terminal Cleaner Car Aerosol Spray Paint for Car Battery Terminal Connectors

Battery Terminal Cleaner Car Aerosol Spray Paint for Car Battery Terminal Connectors

FUNCTION AND APPLICATION:

Battery Terminal Cleaner cleans battery terminals, connectors, battery tray, and holder bolts and brackets

by neutralizing acid corrosion and by cleaning dirt and grease accumulation on the battery.
 

OUTSTANDING PROPERTIES:

Ensures a good contact between the battery post and connector. Ensures maximum current flow from the battery to the

starter.  Removes acid deposits, which could impair cold starts.  Prolongs battery life (receives the maximum charge from

the alternator).
 

USE DIRECTIONS:

Shake can well before using container.  Spray over battery surface and all corroded components on the battery, tray, and

holder.  Let soak for five minutes, then rinse off with water.  Dry components with a paper towel or cloth.  For excessively

dirty components, repeat this application. 

For added protection use: Solder Seal Battery Terminal Protector.
 

PRECAUTIONS:

Contains (CAS#) sodium bicarbonate (144-55-8), 2-butoxyethanol (111-76-2), propane (74-98-6), and butane (106-97-8).  

Contents under pressure.  FIRST AID: For eye contact: flush with clean water for 15 minutes while lifting eyelids and get prompt

medical attention.  For skin contact: wash with soap and water.  For inhalation: move to fresh air.  For ingestion Drink water or

milk.  Do not induce vomiting.  Call Poison Control Center, Physician, or Hospital Emergency Room Immediately.  Consult

Material Safety Data Sheet for additional information.