Home Companies Changzhou Bextreme Shell Motor Technology Co.,Ltd

15A Current Brushless Motor Controller , Rectangle Brushless Speed Controller,bldc motor driver

Contact Us

[China]

Trade Verify

Address: No.8 Tianshan road, Xinbei district,Changzhou,Jiangsu,China.

Contact name:Amigo Deng

Changzhou Bextreme Shell Motor Technology Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

15A Current Brushless Motor Controller , Rectangle Brushless Speed Controller,bldc motor driver

Country/Region	china
City & Province	changzhou jiangsu

Product Details

24VDC 15A current PWM speed control Hall effect BLDC motor driver board JYQD-V7.3E3

MODEL:JYQD-V7.3E3

OPERATING TEMPERATURE(℃) : -20---85℃

OPERATING VOLTAGE(V): 24V

Max Power:500W

CONTINUOUS OPERATING CURRENT:15A

PWM SPEED REGULATION:(1-20KHZ)Duty cycle 0-100%

ANALOG VOLTAGE SPEED REGULATION (V):0-5V

Speed pulse signal output:YES

Applications:

BLDC fan

BLDC motor

BLDC cooling fan

BLDC lawn mower

BLDC centrifugal blower

Wiring diagram

1. Control port

5V —Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation

Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

EL —Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.

Signal— Speed pulse signal output

GND—Used for Drive board internal control

2. Power port

MA ----motor phase A

MB ---- motor phase B

MC---- motor phase C

GND ----DC-

VCC----DC +

3:Hall sensor port

Ha--- Hall a

Hb---Hall b

Hc---Hall c

GND---GND

5V---5V output

Dimensional drawing

Application guidelines
1.	Confirm that the voltage and power parameters of the motor not exceed the range as specified.
2.	Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding, you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect.
3.	JYQD-V7.5E is driver board without housing and heatsink, it can drive the motor below 100 watt without any heatsink, but needs normal ventilation.
4.	The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, reversing and enabling operation