Bextreme Shell 24VDC Car EWP Coolant Pump For Electronic Vehical
Hybrid Bus PHEV Cooling System
Product description
The OWP-BL43-408T BLDC Water Pump, a highly efficient and innovative solution for
various heating and cooling circulation systems. With its advanced
features and robust design, this water pump brings unparalleled
performance and reliability to hybrid buses, hybrid passenger cars,
electric vehicles, trains, ships, and more.
Equipped with a centrifugal pump and magnetic force transmission,
this water pump ensures smooth and efficient operation. The high
efficiency brushless DC motor not only minimizes power consumption
but also offers a long service life, providing optimal performance
for extended periods.
The OWP-BL43-408T is designed to adapt to different operating conditions, thanks to
its wide range of operating temperatures. It can function
seamlessly within a voltage range of 18V to 32V (24V), ensuring compatibility with various power systems.
One of the key advantages of this water pump is its versatility in
controlling flow. By utilizing PWM signal speed control and constant flow regulation, the pump ensures precise and
consistent water flow as per your requirements. This provides added
convenience and efficiency for different applications.
Safety features have also been prioritized in the design of this
water pump. It incorporates reverse polarity protection, dry
running protection, and safeguards against conditions such as
overvoltage, overcurrent, overload, and over-temperature. These
protective measures provide peace of mind and prevent damage to the
pump and the overall system.
Additionally, the OWP-BL43-408T offers diagnostic signal output, enabling easy monitoring and
troubleshooting. This enhanced functionality ensures efficient
maintenance and enhances the overall performance and reliability of
the system.
With its exceptional performance, durability, and extensive
application versatility, the OWP-BL43-408T BLDC Water Pump is the
ideal choice for heating and cooling circulation systems in hybrid
vehicles, electric vehicles, trains, ships, and beyond. Experience
efficient and reliable water circulation with this remarkable water
pump.
Features
◆Centrifugal pump
◆Magnetic force transmission
◆High efficiency brushless DC motor, low power consumption, high
efficiency, long service life.
◆With wide range operating temperature
◆CAN communication interface controlling
◆With constant flow controlling
◆Reverse polarity protection
◆Dry running protection
◆Over Voltage, over current protection
◆Overload, over temperature protection
Technical description (related parts in contact with the liquid)
Pump head housing: Die casting aluminum alloys
Impeller: PPS+GF
Shield cavity: PPS+GF
Shaft sleeve: carborundum composite materials
Shaft: stainless steel(3CR14) shaft
Magnet housing: PPS plastic capsulation
Seal ring: EPDM
EMC: Grade 3
Noise:≤60dB
Driving device (Including motor)
Driving rotor: PPS plastic capsulated magnet
Screws and nuts: SUS 304 stainless steel
Driving Motor : brushless DC motor
Motor wire frame :PPA GF
Pump housing: Die-casting aluminum case with sandblasting and
anodizing +PE powder coating..
Bracket: steel
Bracket hoop: US 304 stainless steel
Waterproof based on IP68 rating (en60529)
Connector model: 325304061AAH (matched Plug 325304061AMH)
Nozzle diameter:41mm (1.61 inch)
Parameter
■ Performance parameter
■ Temperature parameter
Medium liquid temperature: -40℃ to +85℃ (-40°F to + 185°F)
Working ambient temperature: -40℃ to +120℃ (-40°F to +248°F)
Storage temperature:-40℃ to +70℃ (-40°F to +158°F)
(up to 100 ℃, but it will shorten the service life)
■ System pressure
-0.2 to 2.5 bar ( 100℃ (212°F).
The service life is more than 20,000 hours based on the rated
voltage and 36℃(86°F) ambient
temperature.
■ Voltage range
Rated 24V water pump, workable range 18V - 32V
Although the motor can be used in a wide range of voltage and
temperature, but excessive or too
low voltage and temperature will affect the service life of the
motor, the pump can not be
exposed to thermal radiation ambient.
Medium liquid: liquid mixture (Water with below 60% glycol)
■ Electrical parameter
Application guidelines
OWP-BL43-408T series pumps are centrifugal pumps which require pre-filled, The pump installed in the lowest position of the system to ensure
that the impeller is always immersed in the liquid, or pre-filled the pump before power on .
1: Pump should not be dry-running, even though it can dry-running
for 15 minutes (after 15 minutes dry-running, it will automatically
stop), Dry running will makes noise, also increasing abrasion to
the shaft and shaft sleeve.
2:Use the recommended diameter pipe connecting the pump inlet, if
you use a smaller diameter hose pump inlet, Due to the negative
pressure in the pump, the outside air easier enter to the pump
through the pipeline, it will make the pump performance
degradation, and also the air
bubbles make damage to the pump.
3: As viewed from the pump inlet direction, the impeller rotates
clockwise (see the arrow on the outlet port).
4: The pump can be installed vertically or horizontally mounted
(see figure 1 ) When installed vertically, the outlet port should
be upward .
5:In order to avoid the dry- running (air get stuck in
impeller),the water pump outlet port should be vertical or in the
upper of the impeller. (see figure 1 )
6: The connected pipe should be vertically mounted (or no elbow in
20cm )to make the air discharged easily, the outlet pipe should not
be used less than 90 degrees elbow (see figure 2).
7: Can't use the seawater or other heavy pollution with big grain
impurity liquid as the liquid medium .
Dimensional drawing