Home Companies Changzhou Junqi International Trade Co.,Ltd

Coach Bus Cooling Automobile Water Pump 24V 180W for Fuel Cell Pack Cooling

Contact Us

[China]

Trade Verify

Address: No.28 Shunyuan Rd, Changzhou City, JIangsu, China

Contact name:Ivanzhu

Changzhou Junqi International Trade Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Coach Bus Cooling Automobile Water Pump 24V 180W for Fuel Cell Pack Cooling

Country/Region	china
City & Province	changzhou jiangsu
Categories	Pumps

Product Details

Coach Bus cooling system parts JP200 Automobile Water Pump 24V 180W Fuel Cell Pack Cooling Water Pump

Technical Parameters :

No.	Parameters
Model	JP200-2Pin-24V
Rated Voltage:	24V
Working range:	DC18~32V
Rated Current:	7.5A
Flow Rate:	6000L/H
Head:	5.5m
Power:	180±10W
Protection Level:	IP68
Working temperature:	-40~85℃
Medium:	Antifreeze
Working Life:	More than 20000h
Weight:	1.8KG

Mechanical installation

1. The pump can be installed vertically or horizontally mounted (see figure 1 ) When installed

vertically, the outlet port should be upward .

2. In order to avoid the dry- running (air get stuck in impeller),the water pump outlet port should

be vertical or in the upper of the impeller. (see figure 1 )

3.. The connected pipe should be vertically mounted (or no elbow in 20cm )to make the air

discharged easily, the outlet pipe should not be used less than 90 degrees elbow (see figure 2).

4. Can't use the seawater or other heavy pollution with big grain impurity liquid as the liquid

medium .

Performance Curve:

Attentions:

1. Please add a fuse in the water pump power supply circuit to cut off the power supply when appearance the failure.

2. Avoid the water pump is covered or blocked and affected by the surrounding devices heating. The installation space is convenient for maintenance and replacement operation.

3. Working ambient temperature:-40℃--120℃, should try to avoid close to three-element catalytic, gas discharge pipe system and engine during the installation, ensure the working environment temperature

4. The installation position of the water pump should as much as possible close to the low water level , to extend the service life of the pump.

5. Pay attention to the purity of the water, avoid to jam and impeller-blocked to reduce the service life of pump

6.Please use the pump far from the dusty environment, the dust is harmful to reduce the service life

Mechanical Dimensions: