Sous Vide Regeneration Water Bath Oven 8-Quart Stainless Steel Digital Timer & Precise Temperature control foolproof

Sous Vide Regeneration Technic Blue 

can be fitted to water baths, tanks and containers using accessory Mount Bracket.
Sous Vide Regeneration is a durable stainless steel construction, painted surfaces are powder painted with tough anti-bacterial finish with good chemical resistance. Easy to use controls that wipe clean and have an anti-bacterial finish. Immersed components are corrosion resistant. Quiet running in use and providing excellent water temperature stability. Indication of heating, over temperature alarm and timer running.
When a low liquid level is detected a “FiLL” message automatically appears and heating is suspended. Once refilled, heating is restored and temperature control resumes automatically. Over and under temperature alarms automatically protect work in the water bath, providing heater cut off, visual message and indicator.

Controls

Featuring bold LED display of measured temperatures in real-time, increments of ±0.1°C, using precision PID temperature control. Setting for water temperature only or combination of temperature and time. Timer setting variable in 1-minute increments from 00:01 [hh:mm] to 99:59 [hh:mm] with “end” message on completion-timed period. Settings retained even after turning the unit off.
Easy to use controls, utilising touch keypads for setting time and temperature values with indicators for heating, over temperature alarm and timer.
The water bath can be set to run at a set temperature or commence the timer once the water reaches set temperature.

Features auto setting over and under temperature alarm protecting your work at set temperature.

Every unit undergoes a factory calibration at two temperatures for validation.

Safety Features

Features a low liquid level float switch, which ensures heating, is switched off if the liquid falls below the recommended level - display will show “FiLL”. Heating is switched off but stirring continues. To reset carefully top up the liquid to the recommended level.

The under/over temperature alarm is automatically set 4˚C above and 4˚C below set temperature. When in alarm condition the indicator illuminates and actual bath temperature is shown, if bath is over temperature both heating and stirring are switched off. Once liquid temperature has fallen or risen above/below the alarm setting the indicator clears and actual bath temperature is shown.

Heating/Cooling Information

For water temperatures below ambient we recommend a glycol/water mix or accessory solution LB-5.0 Lab Bath, lid or spheres fitted to retain the cold. For cooling an accessory DC1-300 Immersion Cooler can be used. We recommend operating the water bath in an ambient temperature 20°C.

For water temperatures above 60°C we recommend accessory lid or spheres fitted for optimal performance, reduce evaporation, assists keeping work and water free from contamination, saves energy reducing electricity consumption and running costs.

Power Consumption (220-240V/120V)

520W