General description
3-in-1 filling machine, combined with rinsing, filling and capping.
It is innovated and designed in the requirement of still pure water
and mineral water, on the bases of introducing, digesting and
absorbing advanced technology from Germany and Italy.
Main features
1. Rinser
Spring cramps are used in the bottle washing process. The empty
bottles can be turned over 180° Along the conveying rail. There are
two times of internal and external washing, the efficiency of
bottle washing is high.
Rinsing machine adopts Sunswell original oVERTUrn and double-opened
bottle clip. Bottle clip lock the bottleneck, the material of
bottle clip is SUS304, which is hygienic and durable.
Bottle clip equipped with efficient spray on nozzle. The extrusive
droplet with 15° Angle ensures to wash all side of the bottle, and
can save the water.
Made of stainless steel of superior quality.
Equipped with bottle jam protection device.
2. Filler
The design of filling structure is reasonable and hygiene dead
angle, the run of equipment is stable, it can control the material
from the bottleneck, the control accuracy is within ± 2mm (subject
to bottle design). The filling valve material is SUS304. The
filling system has liquid level automatic control. Filling valve
lift is controlled by the valve elevator, after filling valve
contact the bottleneck, it start to fill. Bottle is conveying by
the wheel in the filling part.
3. Capper
Screw capping machine is most precision part in the 3-1 machine, it
has a big influence to the goods stability and defective rate. Our
screw capping has following feature.
Equipment structure
Base
Rotary rinser
Rotary filler
Rotary capper
Bottle infeed and outfeed system
Control
Main configurationTouch screen: Pro-face
PLC program controller: Mitsubishi
Inverter: Mitsubishi
Photoelectrical controller: Leuze
Proximity switch: Leuze
Other electrical components: Schneider
Pneumatic component: Festo
Water pump: Nanfang
Main motor: ABB or SEW
Technical Parameters
Model: XGFH32-32-8
Number of working stations: rinser 32, filler 32, capper 8
Rated capacity: 15,000BPH (500ml)
Applicable bottle: diameter 50-90mm, height 165-310mm
Air supply pressure: 0.7MPa
Air consumption: 0.8M3/min
Rinsing water pressure: 0.2-0.25 MPa
Consumption of rinsing water: 2.4 tons/hr
Way of filling: gravity filling
Main motor power: 4 KW
Installed power: 5.5 KW
