Home Companies Shenzhen Bely Energy Technology Co., Ltd.

1280Wh 100 Amp Hour 12 Volt Lifepo4 Battery For Solar Power Storage

Shenzhen Bely Energy Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 4/F, No. 1 Building, HuaWei KeGu Industry Park, Dalingshan Town, Dongguan, Guangdong, China. P.C.: 523000

Contact name:Sales department

Inquir Now

Shenzhen Bely Energy Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

1280Wh 100 Amp Hour 12 Volt Lifepo4 Battery For Solar Power Storage

Country/Region china
City & Province dongguan guangdong
Categories Batteries
InquireNow

Product Details

12 Volt Lifepo4 Battery 12V 100Ah For Solar Power System , Energy Storage / Base Station

 

Description of LiFePO4 Battery

1. More than 3000 cycles time and 2 years long guarantee time.

2. More rechargeable time, longer life time, economic and environmental protection.

3. Light weight and portable.

4. LIFEPO4 material more safe.

5. Inbuit BMS multiple security protection.

Period of Warranty

The period of warranty is 2 years from the date of shipment. Maximum guarantees to give a replacement in case of battery with defects proven due to manufacturing process instead of the customer abuse and misuse.

Long service life

Lithium rechargeable battery cycles more than 3000 times,which is more than 8 times comparing with Lead-acid batteries(usually only last for 300-400 cycles).

EASY REPLACEMENT THE EXISTING BATTERY

The dimensions of the housing are identical with the most common AGM, lead acid or GEL batteries. With optionally available round poles can also use existing pole, terminals can be reused. An exchange the battery holder or a change the loading structure is not necessary.

 

Specification of Lifepo4 Battery 12v 100AH

SpecificationParameterRemarks
NominalVoltage12.8V
 Capacity100Ah/1280Wh
PhysicalDimension278mm x 175mm x 190mm
Weight12KGS
ElectricalWorking Voltage Range10~14.6V
End of Charge Voltage14.4~14.6V
Recommended Charging Current50A
Max. Charging Current80A
Max. Continuous Discharging Current100A
Peak Discharging Current (≤20 sec.)150A
OthersCharging Temperature Range0~55℃
Discharging Temperature Range-20~60℃
Storage Temperature Range-20~60℃
Cycle Life≥3000Cycles
Internal Impedance≤20mΩ
ConnectorCopper pillar
Protection ClassIP65
Battery Cells TypePrismatic

Battery Benefits

Good consistency, low self discharge

Low self-discharge

High performance traction/storage battery

Integrated (BMS) battery management system

Safe lithium technology (LiFePO4)

High max continuous discharging current

Light weight

One to one replaceable with lead acid battery

 

Battery Management System(BMS)

The battery management system (BMS) built into each battery ensures that the battery switch off in the event of under voltage or overload and automatically again turns on as soon as the problem is resolved.

 

Application of LiFePO4 Battery

Solar power bank, Solar LED lighting, Solar street light

Motohomes, caravans and RV

Photovoltaics, solar systems and renewable energies

High performance traction/storage battery

Bluetooth, GPS, Wearable device, Power supply, Wireless

 

Storage and transportation

The battery must be packed and protected well during transport.

The lithium battery must be transported according to the rules for transport, these should always be followed (transportation code UN3480/UN38.3).

Never lift the battery by the terminals, only by the handles.

The battery should be stored in temperatures from -10℃ to +30℃. During transport, the battery should be about 50-60% charged.

The battery should be charged every three months to keep it active so that it always works maximum.

 

Install the LiFePO4 battery

Lithium LiFePo4 batteries are heavy. Make sure it is adequate and safe attach and always use the appropriate transport equipment.

In an accident unsecured, batteries could become a projectile! Always take carefully with lithium batteries.

Make absolutely sure that the LiFePO4 battery is not connected with reversed polarity.

Should the battery be connected incorrectly, the BMS electronics will be irreparably damaged and must be replaced with a new BMS board. This is not a warranty case.

 

Important instructions

Do not open the LiFePO4 battery without consulting the dealer. Unauthorized opening of the battery voids the manufacturer's warranty.

▪ Only use the battery for the application for which it is intended.

▪ Do not short-circuit the LiFePO4 battery. The cable connections to the consumers must go through a backup to be protected.

▪ Installation and maintenance may only be carried out by qualified specialists.

▪ Do not expose to permanent direct sunlight. Protect from the effects of heat. Temperatures above +60 ° C can damage the battery.

▪ Use only compatible chargers. The battery is in a longer storage of all disconnect devices.

▪ Pay attention to proper assembly.

▪ Avoid damage of any kind, for example by falling, drilling, etc. (Risk of short circuit).

▪ Always keep the battery dry and clean.

▪ Note the plus (+) and minus (-) markings on the LiFePO4 battery and the device and pay attention to the correct polarity.

▪ The cycle capacity may vary due to the change in the working temperature and the charge and discharge rate differ from the nominal capacity.

▪ Suitable for parallel connection maximum four batteries (If need series connection, the BMS should be customized with higher cost).

Before connecting, bring to the same charge level. Batteries from different manufacturers or different types should not be interconnected.

 

FAQ:

Q1. Can I have a sample order?

A. Yes, we welcome sample order to test and check quality.

 

Q2. Do you have any MOQ limit?

A.Yes, we have MOQ for mass production, it depends on the different part numbers. 1~10pcs sample order is available. Low MOQ, 1pc for sample checking is available.

 

Q3. How to proceed with an order?

A. Firstly let us konw your requirements or application. Secondly, we quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places a deposit for formal order. Fourthly we arrange the production.

 

Q4. Is it OK print my logo on the product?

A. Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

 

Q5. Which certificates do you have?

A. We have CE/FCC/ROHS/UN38.3/MSDS ... etc.

 

Q6. How about warranty?

A. 2 years warranty.

 

 
 
 

 

Hot Products

The Strongest Momentum 12V LiFePO4 Battery 12V 80Ah Catl Battery With LED Display For Toys / ...
Lifepo4 Battery 12V 100Ah With LED Display For Home Solar Energy Storage System , Leisure Descriptio...
Latest Design LiFePo4 Battery 12V 150Ah With LED Display For Electric Power System , Scooter ...
Deep Cycle LiFePO4 Lithium Battery 12V 80AH For Robot , Camping Car , Home Storage Description of ...
12 Volt Lifepo4 Battery 12V 100Ah For Solar Power System , Energy Storage / Base Station Description ...
12V LiFePo4 Battery 12V 100Ah For Refuge Boat , Communication Station , Consumer Electronics ...