Horizontal Idler Roller Inclined Sidewall Belt Conveyor Lifting 14m Height

Lifting 14m Height Horizontal Idler Roller Inclined Sidewall Belt Conveyor

The Inclined Sidewall Belt Conveyor (also called corrugated sidewall belt conveyor, high-incline conveyor, etc.) is a new type of continuous conveyor equipment developed based on the general-purpose belt conveyor to meet the large-angle transportation. .The Inclined Sidewall Belt Conveyor adopts a corrugated sidewall conveyor belt, and a corrugated vertical skirt is added on both sides of the flat conveyor belt. A horizontal partition with a certain strength and elasticity is added to the middle of the skirt to form a box-shaped bucket. The material can also be conveyed continuously in the hopper.

Inclined Sidewall Belt Conveyor is one of the most commonly used mining equipment, which is widely used in mineral processing, construction materials, silicate and chemical industries. In the production of small scale, medium scale or large scale mineral processing Plants, it is generally used as the transportation machine for metal ores of gold, silver, copper, lead, zinc, nickel, manganese, iron, molybdenum , chromium, tin and others, as well as stone, rock, granite, limestone, quartz, graphite, feldspar, coal, etc.

Working Principles

The horizontal loading section leads a deflection wheel bends the belt into the feeding of the bulk material takes place on a mostly horizontal feed path, where the side wall belt is supported by loading impact idlers. The feeding of the conveyed material can be achieved by direct feeding from a hopper, over a chute, a feeding belt or a feeding pulley. The selection of the optimum feeding station depends on the properties of the bulk material and the belt speed of the vertical conveyor. The upward and downward strands are encased from the bottom to the top. Substructures or support rollers are not necessary in this section.
The vertical section leads over a deflection curve into the horizontal discharge section. The deflection curve is made up of a number of high specification pulleys. These pulleys experience the vectored load of deflecting the belt tension from vertical to horizontal.
At the drive pulley, the bulk material is discharged and the belt is returned to the back going strand. Depending on the bulk material properties, the drive pulley is followed by a beater wheel for belt cleaning in the return side. The beater is self-driven. Material that fails from the belt goes into the main delivery chute. Lateral deflection wheels turn the belt from the horizontal back to the vertical.

Advantages

1. Allowed inclined conveying, Max angle is up to 90 degree; Adjust speed and adjust height according to your need;The machine be designed fixed belt conveyor and mobile belt conveyor according to customer's need;Conveying, loading and unloading equipment with high efficiency and good flexibility;Smooth transportation, There is no opposite movement between the goods and the transport belt, to avoid damage on the material to be transported;Less noise, suitable for the work environment requires relatively quiet occasion;If there is not external electric source, we can provide diesel engine, electric generato

Technical parameters for reference

Operation regulation and maintenance

• Inclined Sidewall Belt Conveyor should be operated in according to design requirement.

• Inclined Sidewall Belt Conveyors are not allowed to overload run.

• Check wear condition of the belt, the damaged should be repaired.

• Operators should circuit to inspect to close observe belt conveyor running. Especially,temperature rise and noise of main motor and the brake working whether they are normal; contact state of the brake and oil level, noise of gear unit and run off of belt should be noticed;temperature rise and noise of all bearings and state of all transition loads point should be noticed;

  notice to see whether the hopper are blocked, working state of pulley, idler, belt cleaner, take-ups and control equipment.

• Operators should make good record if any abnormal. The belt conveyor should be stoppe on emergency.

• Periodic overall: Minor overall should be once every monthes besides ordinary maintenance Overhaul should be once half past year or once every year.