Active Member
|
[China]
Address: No.388 Heping Road, Xinxiang City, Henan Province,China
Contact name:Emily
Xinxiang jinrui machinery factory |
|
|
| Belt width | Flange high | Diaphragm spacing | Angle of inclination | ||||||||||
| 30° | 40° | 50° | 60° | 70° | 90° | ||||||||
| mm | mm | mm | Delivery value(m3/h) speed of belt=1m/s | ||||||||||
| 80 | 126 | 39 | 31 | 25 | 20 | 17 | 10 | ||||||
| 500 | 120 | 252 | 52 | 40 | 32 | 26 | 21 | - | |||||
| 160 | 378 | 65 | 52 | 42 | 34 | 28 | 17 | ||||||
| 80 | 126 | 59 | 47 | 37 | 31 | 25 | 15 | ||||||
| 650 | 120 | 252 | 78 | 60 | 48 | 39 | 32 | - | |||||
| 160 | 252 | 105 | 85 | 68 | 55 | 45 | 28 | ||||||
| 120 | 129 | 99 | 76 | 60 | 49 | 40 | - | ||||||
| 800 | 160 | 252 | 136 | 110 | 88 | 72 | 58 | 36 | |||||
| 200 | 378 | 148 | 114 | 91 | 74 | 61 | 37 | ||||||
| 160 | 252 | 223 | 180 | 144 | 117 | 96 | 59 | ||||||
| 1200 | 200 | 378 | 250 | 193 | 154 | 126 | 103 | 63 | |||||
| 240 | 378 | 342 | 280 | 224 | 183 | 149 | 91 | ||||||
| 300 | 504 | 410 | 352 | 290 | 237 | 198 | 118 | ||||||
| 200 | 252 | 299 | 231 | 185 | 151 | 123 | 75 | ||||||
| 1400 | 240 | 378 | 422 | 345 | 276 | 225 | 184 | 113 | |||||
| 300 | 348 | 512 | 440 | 363 | 296 | 241 | 148 | ||||||
Selection Conditions
| ♦ Material to be processed: _____ | ♦ Max. granule size of the feeding material: _____mm |
| ♦ Handling capacity (Ps. It means the total | ♦ Percentage of Max. granule in material:_________% |
| material capacity feeding from the inlet): _____t/h | ♦ Upstream equipment (Ps. It means what kind of |
| ♦ Bulk Density: _____t/m3 | equipment is used to feed the material): _____ |
| ♦ Material temperature: _____ºC; | ♦ Downstream equipment (Ps. It means what kind of |
| ♦ Water content:____% | equipment is used to discharge the material): _____ |
| ♦ Material is corrosive or not: ____ (Ps. Yes or No) | ♦ Working power supply: _____V ______HZ |
| ♦ Material is sticky or not: ____ (Ps. Yes or No) | ♦ Please refer to the following picture and provide the |
| ♦ Working environment is indoor or outdoor | relevant parameters:L1____m, L2___m, H___m, α____° |
| or indoor and outdoor: ______________ | Working environment temperature: ______ ºC |
