Home Companies Xinxiang jinrui machinery factory

Trough Idler Roller Set Conveyor Spare Parts 89mm Diameter Carbon Steel

Xinxiang jinrui machinery factory
Active Member

Contact Us

[China] country

Address: No.388 Heping Road, Xinxiang City, Henan Province,China

Contact name:Emily

Inquir Now

Xinxiang jinrui machinery factory

Trough Idler Roller Set Conveyor Spare Parts 89mm Diameter Carbon Steel

Country/Region china
City & Province xinxiang henan
InquireNow

Product Details

Conveyor Spare Parts Trough Idler Roller Set 89mm Diameter Carbon Steel

1. Advantages and Features

(1) It is conducive to the operation of the rubber conveyor belt. Under the condition of making full use of the vertical movement characteristics of the elastic roller, the roller group can adapt to any load. If the ground is uneven and the bracket tilts horizontally, the roller group can reach balance;

(2) It is convenient to replace the idler. If one idler is damaged, the idler set can be out of contact with the conveyor belt under the condition of uninterrupted transportation, which is convenient for replacement at any time. If a rigid fixed roller is used, the machine must be stopped when replacing the roller, which will cause inconvenience.

(3) Reduce operating noise. Because the rollers are connected flexibly, the relative changes in the position of each parallel roller in the roller group can absorb and eliminate vibration and impact, so that the operation becomes stable. The buffer roller is installed in the conveyor. The receiving part of the machine is used to protect the heat-resistant conveyor belt products. Each roller of it is made of elastic discs equipped with a certain interval. The rated load parameters are the same as the national standard requirements. It is used in the transportation of heavy and bulk materials. Under the circumstances, the requirements for on-site use can be fully satisfied.

No.PartDescription
1TubeSteel(Q235), Stainless Steel
2ShaftUncoated steel(C45 steel), stainless steel
3Bearing housingStamping(Steel)
4BearingPrecision ball bearing,2RZ,C3
5SealLabyrinth Seal (Nylon)
6DiscRubber Disc

 

2. Main function and scope of application

There are many types of trough rollers, which are widely used in open-air dusty and corrosive environments, such as power plants, steel plants, cement plants, salt plants, fertilizer plants, docks, etc.

 
3. More attention:
3.1. During the installation, pay attention to the assembly dimensions of all parts of the fuselage and keep the straightness of the whole machine.
3.2. Tighten bolts when installing bolt fasteners.
3.3. The center line of the belt at both ends shall be aligned when making the belt joint to prevent the belt from running off.
3.4 When installing the protection part of the electric appliance, be careful to prevent damage.
 
4. Packing Details:
4.1, Outer packing is plywood case, which is up to the international standards.
4.2, Inner packing is Moisture-proof and water-proof membrane.

4.3, All of package are wrapped by 0.5mm steel belt to further strengthen.

 

5. Maintenance and repair
5.1 under normal conditions, the conveyor is required to start without load and avoid short-time starting.
5.2 it is necessary to check whether there is oil leakage in the reducer regularly, and whether the regular oil filling volume is in conformity with the construction in time Correct and supplement.
5.3 if there is squeal at the driving drum, it means that the belt is slipping. Check whether the belt is tensioned.
5.4 the belt joint shall be inspected frequently, and the damaged parts shall be cut and redone in time, and the damaged parts shall be protected during redoing
 
How to packing!!!
 

Hot Products

Troughed Rubber Inclined Belt Conveyor Machine Flat Model 800mm Width Working principle Belt ...
Motor Reducer Drive Inclined Conveyor Belt Stable Performance Reliable Operation Working principle ...
Screw Tensioning Inclined Belt Conveyors Different Belt Width Long Service Life Application Belt ...
Height Adjustable Belt Conveyor Movable Model For Fertilizer Coal Plant 1.Advantages and Features 1...
Conveyor Spare Parts Trough Idler Roller Set 89mm Diameter Carbon Steel 1. Advantages and Features ...
Troughing Idler Roller Stations For Mining Conveyor Belt Spare Parts Diameter φ89,φ102,φ108,φ114,...