Active Member
|
[China]
Address: No.388 Heping Road, Xinxiang City, Henan Province,China
Contact name:Emily
Xinxiang jinrui machinery factory |
|
|
The screw conveyor (also known as sprial conveyor) has the
advantages of simple structure, small cross-sectional area, closed
conveying, low manufacturing cost, flexible and convenient
application, convenient for loading and unloading in the middle of
the production line. The conveying direction can be reversed, and
materials can be transported in two opposite directions at the same
time.
In the transportation process, it can also play the function of
mixing and mixing materials. In the loading and unloading gate, the
material flow can be adjusted, but the axial screw conveyor is not
suitable for conveying viscous, high water content and bulk
materials (such as sludge, clay, etc., shaftless screw conveyor can
be used). In the process of conveying, the material is easy to be
broken, and the screw and the material trough are easy to wear. In
use, the sealing property of the material groove and the proper gap
between the screw and the material groove should be maintained.
The screw sprial conveyor is a kind of continuous conveying
equipment without flexible traction, which uses the rotating screw
to move the conveyed material along the fixed casing. It is as if
the unrotatable nut is held and translated along the screw. The
force that keeps the material from rotating with the screw is the
gravity of the material and the friction against the shell.
The advantages of the screw sprial conveyor are: simple structure,
convenient maintenance, small size of the cross section, can enter
and leave materials at any position in the length direction, and
can use the cover of the tight closed housing to achieve a better
sealing effect.
Therefore, screw conveyor is widely used in various industrial
sectors to transport a variety of powdered, granular and small
materials, such as coal ash, cement, sand, coal, cereals and so on;
it is not easy to transport viscous caking materials which are easy
to deteriorate.
| Model | Diameter mm | Pitch mm | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) | Speed r/min | Standard Capacity(m3/h) | ||||||
| φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 | φ0.45 | φ0.33 | φ0.15 | ||||||
| LS200 | 200 | 200 | 100 | 16.9 | 12.4 | 5.6 | 80 | 13.5 | 9.9 | 4.5 | 63 | 10.7 | 7.8 | 3.6 |
| LS315 | 315 | 315 | 80 | 52.9 | 38.8 | 17.6 | 63 | 41.6 | 30.5 | 13.9 | 50 | 33.1 | 24.2 | 11 |
| LS400 | 400 | 355 | 71 | 85.3 | 62.5 | 28.4 | 56 | 67.3 | 49.3 | 22.4 | 45 | 54.1 | 39.6 | 18 |
| LS500 | 500 | 400 | 63 | 133.2 | 97.7 | 44.4 | 50 | 105.8 | 77.6 | 35.3 | 40 | 84.6 | 62.0 | 28.2 |
| LS630 | 630 | 450 | 50 | 188.9 | 138.5 | 63.0 | 40 | 151.1 | 110.8 | 50.4 | 32 | 120.9 | 88.6 | 40.3 |
| Material to be processed: _____ | Working environment is indoor or outdoor:________ |
| Handling capacity: ________per hour | Working environment temperature: _______ ℃ |
| Bulk Density: _____t/m3 | Installation form is horizontal or inclined : ________ |
| Conveying distance: ________ | If it is inclined,what is the inclined degree_____° |
| Material size:____mm | Water content:____% |
| Material temperature: _______ ℃ | Working power supply: _____V ______HZ ______PH |
