Small Tube Squeezing Machine Membrane Panel Welding Machine For Boiler Pipe

Small Tube Sizing Machine Membrane Panel Welding Machine for Boiler Pipe

1. Model

● This equipment is designed simply as C type and has 9 oil cylinders for hydraulic drive.

● It is used to squeeze and calibrate small heated elbow on the same level. A qualified 180°elbow of Φ=76mm thickness=12.7mm R=1.5D can be squeeze to R=0.6D and achieve technical requirement.

2. Technical detail

● Pipe diameter: D=Φ32-Φ76mm
● Pipe thickness: 3-12.7mm
● The bend radius of 180° elbow before squeezing: R=1.5D
● The bend radius of 180° elbow after squeezing: R=(0.6-1.2) D
● The maximum open distance of clamp made: L=400mm
● Squeeze pressure: F= 45t
● Calibration pressure: F=120t
● Hydraulic system pressure: N=16Mpa
● Pump power: N=18.5kw

3. Constitute

● C-type frame (lathe bed), have nine oil cylinder, hydraulic transmission
● Calibration cylinder maximum180t
● Back pressure cylinder
● Left and Right squeeze mechanism
● Up/down of under mode calibrated by slide
● Mainly uses PLC control, heating control in the same panel, simple operation, low failure rate. Use sensor to test squeezing distance

4. Parts supplied