Thread Rolling Machine For Making Anchor Bolt
Bar CNC Drilling And Threading Machine
Threading Rolling Machine
1.Two spindle of the machine rotates synchronously in the same
direction .Right spindle feed motion in the horizontal direction
under the rolling drive.Two rolling wheels make the work as
required and other thread shape by rolling.
2.This machine is mainly composed of an organism, rotating box,
fixed spindle seat , a movable spindle seat, hydraulic system and
electrical parts etc.
3.The fixed seat and the movable seat main function is installing
the screw rolling wheel and adjusting the rolling wheel tooth.
4.This machine is a hydraulic power system, it is mainly to make
the active spindle seat to feed and return
5.The two spindle seat adjust center respectively.Angle of table
axis can be adjusted in the plus or minus 3 degrees.Each shaft to
feed the workpiece can be determined according to the parameters of
workpiece and mechanical properties of materials.
Model | GS42 | Distance from spindle center | 150-300mm |
The rolling press | 200KN | Active force | 11kw |
Thread rolling wheel diameter | 220mm | Roller diameter | 12-100mm |
Thread rolling wheel width | 160mm | Thread rolling round aperture | 75mm |
Spindle speed | 20,25,31,41,51,64r/min | Length of thread | unlimited |
Size | 1790*1730*1430mm | The cooling power | 0.12kw |
Hydraulic power | 5.5kw | Weight | 1800kg |