|
[China]
Trade Verify
Address: No.2 Building 13, No. 6 Fengxi Road,Caijiagang Town, Beibei District,Chongqing,China
Contact name:Elva Zhang
Allwin Machine & Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
ARO Diaphragm Pump Ink Grinding Machine Mill 18.5kW Stainless Steel Inner Chamber
The main introduction:
This bead mills are main consists of chamber and disc dispersing system. The double end mechanical sealing with indepent technology could resistant to more than 1600 kinds of solvents. The series have great flow rate and super fine discharging, the finally fineness can be reach 1um for D90 .The cooling efficiency is better than normal mills because the sectional double spiral water course is more beneficial to heat exchange. The grinding efficiency is higher 15-30% than traditional mill machines; the combined disperser can rapidly increase dispersing efficiency.All the materials of contact parts could be chose from wearable steel, stainless steel, PU and ceramics for meeting different requirements.
The Technical Data:
| No | main parameters | SP20 | Note |
| 1 | Non Explosion-proof motor kW | 18.5kW (Non Ex) | |
| 2 | Effective volume of grinding chamber (L) | 20 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 1980*900*1900 | |
| 6 | Weight (kg) | 1000 |
The Configuration instructions:
1. Outer chamber materials: 304 stainless steel
2. Inner Chamber materials: 304 stainless steel or you need
3 .Dispersing shaft: 40Cr with hard chromium plating
4. Dispersing disk: PU coated 304 stainless steel
5. Feeding and discharging end covers on the cylinder: 304 stainless steel
6. Turbine centrifugal separator and pins: 304 stainless steel and YG6 pins
7. Static discharge screen ring: Wire Wound screen ring with 304.Gaps: 0.5mm.
8. Mechanical seal: Intelligent double mechanical seal with indepent technology
9. Feeding pump: 1.5” ARO diaphragm pump;
10. Appliance configuration: Non Explosion-proof machine, suitable for water base materials, motor 55kW. Non Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves with NO ex electrical contacts, Control system (button type).
11. Fasteners and connecting parts: Stainless steel clamp-type connecting parts.
The related products:
The dispersing machine
The 11 patents certification:
For the materials of inner chamber, dispersing disks are widely chosed according to your detailed requiriments. such as SUS304 stainless steel, Wearable steel, PU coated the 304 stainless steel, wearable alloy steel and ceramics.
If any need please don't hesitate to contact us, we will recommand the suitable machines for you after communicating and know your detailed needs.
