10L Paint Coating Wet Milling Equipment 30kW Bead Grinding Machine

Used In Paint Coating Ink Food Process Large Flow And Energy Saving 10L 20L 30L Wet Milling Equipment​

 The working principle of Wet Milling Equipment

The working principle is to use the material pump to feed the solid-liquid mixture material that has been pre-dispersed and wetted by the mixer into the chamber, and the material and the grinding medium in the chamber are stirred by the high-speed rotating disperser, so that the solid particles in the material and The grinding media produce stronger collision, friction, and shearing effects with each other to achieve the purpose of accelerating the grinding of fine particles and dispersing aggregates. After grinding and dispersing, the material passes through a dynamic separator to separate the grinding medium and flows out of the discharge pipe.

 Main Technical Parameter of  30L Wet Milling Equipment

Configuration instructions information of Wet Milling Equipment:

1. Outer Chamber: 304 stainless steel

2. Inner Chamber: silicon carbide ceramics

3.Dispersing shaft: 40Cr with hard chromium plating

4.Dispersing disk: 304 Stainless steel

5.Mechanical seal: Double Mechanical seal with Pressure of 0.45 Mpa

6.Feeding and discharging end covers on the chamber: 304 stainless steel

7.Turbine centrifugal separator and pigs: 304 stainless steel and YG6 pines.

8.Static discharge screen ring: 304 stainless steel screen ring with 304.Gaps: 0.5mm.

9.Feeding pump: 1" ARO pneumatic diaphragm pump.

10.Electric Appliance configuration: Non Explosion-proof machine, suitable for water base materials, explosion-proof motor 30kW. Non Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves with Non EX-proof electrical contacts.

11. Fasteners and connecting parts: Stainless steel clamp-type connecting parts.

The Allwin history 

Since founded in 1993, Allwin have been concentrating on grinding-dispersing technologies for half a Century. Mr. Wang Yongqi, Our Chief Engineer of Allwin Machine Equipment Co, Ltd and senior engineer developed the Chinese first sand mill in 1967.Over the past 24 years; Allwin machine has made great achievements through bold innovation and continuous practices. We have 11 patents about bead mills and won the certificate of IPR compliance. We could offer both grinding bead mills and production lines for wet grinding users. In the past 6 years, we made more than 300 experiments for dispersing and grinding, have more than 1300 bead mills applications in different fields.

The production show

The main processing equipment

The United State imported 4 alex processing center

The customer site picture