Active Member
|
[China]
Address: Aoshan Optics Valley Century City, Gaoxin Avenue, Hongshan District, Hubei Province
Contact name:jack
Wuhan Bochuangxing Laser Technology Co., Ltd. |
|
|
Cutting Machine 1000W Price/CNC Fiber Laser Cutter Sheet Metal
Features
1. MS-6XG series CNC pipe intersecting wire cuting machine is a
kind of equipment for automatic calculation and cutting of the
joint of
steel pipe end.
2. CNC pipe ctting machine adopts eylindrical coordinate coeffcient
control, and the number of control axes is 6 axes and 5 linkages.
It
has Chinese interface, parameter input variable angle groove
surface cuting functin, pipelie non-roundness and eccentricity
compensation function.
3. The numerical control interface of 3ICNC pipe cutting machine is
combined with graphics and data. The operation is very simple: the
operator only needs to set the parameters such as the radius of the
main pipe and the branch pipe, the intersectin angle, the cuting
speed
and so on.
Technical parameter
| Serial number | project | parameter |
| 1 | Effective cutting range (mm) | 6000mm-120000mm |
| 2 | Tube diameter cutting range (mm) | Ф60mm～Ф500mm |
| 3 | Input voltage | 220±10%V AC 50HZ/60HZ 220W |
| 4 | Total power | About 1000w |
| 5 | Rated rotation speed | 0-15rpm (can be adjusted according to customer requirements) |
| 6 | Reset accuracy | ±0.2mm/m |
| 7 | Pipe Ovality | ≤2% |
| 8 | Running accuracy | ±0.2mm/m |
| 9 | Number of CNC controlled axes | 6 axis 5 linkage |
| 10 | Chuck size | 500# |
| 11 | Cutting torch lifting stroke | 400mm |
| 12 | Maximum tube weight | 1500KG |
| 13 | Plasma cutting thickness | Depending on the size of the plasma power source selected by the user |
| 14 | Flame uses gas form | Oxygen + acetylene / oxygen + propane |
| 15 | Flame cutting tube wall thickness | 5mm ~ 50mm (optional) |
| 16 | Gas pressure | ≤0.08MP |
| 17 | Oxygen pressure | ≤1.0MP |
| 18 | Cutting material table | Provide material table drawings |
