|
[China]
Trade Verify
Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact name:Lynette Wong
KingPo Technology Development Limited |
|
Verified Suppliers
|
|
|
Dust Test Chamber
Function Description
The chamber is applicable to check whether the device and components are ensured good performance when electrical product and its outer case are sealed in an excessively dusty environment,which is of scientific design and vividly simulate various environment like dusty one.Intelligent PLC control system make dust amount reaches test requirement.The top-down and non-laminar flow dust fall vertically on the sample and then vibrate the collecting funnel to circulation fan.(Note:Internal size of non standard dust test chamber can be customized.)
Technical Parameter
| type | KPSC500 | KP-SC-1000 |
| Interior dimension | D800XW800XH800MM | D100XW1000XH1000MM |
| Rated voltage | 220V 50HZ | 380V 50HZ |
| vacuum pump(IP6X) | 0～30Kpa(optional accessory ) | 0～30Kpa(optional accessory) |
| Air pressure(optional) | 0.5～0.8MPa | 0.5～0.8MPa |
| Test time | 0～99h 59min | 0～99h 59min |
| Load cycle(optional) | 0～99h 59min | 0～99h 59min |
| Blowing dust period control | 1s～9999min | 1s～9999min |
| Flow rate | ≤2m/s | ≤2m/s |
| Test grit(talcum powder)dosage | 2kg/m3-4kg/m3 | 2kg/m3-4kg/m3 |
| Interior material | SUS202#stainless steel/ cold rolled sheet with plastic spray | SUS202#stainless steel/ cold rolled sheet with plastic spray |
| Exterior material | SUS202#stainless steel | SUS202#stainless steel |
| Exterior dimension | D1000 X W1300 X H1700Mm | D1200 X W1500 X H1850Mm |
| controller | Independent R&D PLC touch screen controller | Independent R&D PLC touch screen controller |
| Power | 1.5KW(according to load requirements) | 2KW(according to load requirements) |
| Metal screen mesh | nominal wire diameter50µm;nominal spacing between wires75µm | |
