Address:
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact name:Lynette Wong
KingPo Technology Development Limited
Verified Suppliers
Trust Seal
Verified Supplier
Credit Check
Capability Assessment
Featured Products: E26d Lamp Cap Gauge Screw Thread Gauge iec 60061 3 With Calibration Certificate, 7006-28A-1 E27 Lamp Cap Gauge / NOT GO Gauge For E27 Caps On Finished Lamps, DIN-VDE0620-1 Lamp Cap Gauge For Measuring German Standard Plug And Socket and more.
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 10.4mm For E26d Caps On Finished Lamps E26d-7006-29d-1 PURPOSE: To check dimensions Cmax. and C1max. of caps E26d. TESTING: ...
E27 Lamp Cap Gauge | "NOT GO" Gauge for E27 Caps On Finished Lamps | 7006-28A-1 Purpose: to check the minimum outside(major) diameter of the screw thread, dimension "D" of E27 caps ...
DIN-VDE0620-1 Plug And Socket Gauge For Measuring German Standard Plug And Socket Product information: The gauges conforms to the standard of DIN-VDE0620-1.It is measuring German ...
G5 Lamp Cap Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max.,and the combined pin diameter and ...
IEC 62368 Edition 3, CDV Steel Disc, Aluminium Ring And Aluminium Foil For Wireless Charge The following foreign object are used: 1. Steel disk: IEC CDV 62368-1/Ed3-Figure 47...
Zhaga book 18 -Annex B Mechanical drawing of the Mechanical-stop-gauge 5.1.1 Mechanical-stop-gauge The Mechanical-stop-gauge is defined in Annex B. This gauge is used to verify ...
E26d Lamp Cap Gauge | Gauge For Caps On Finished Lamps For Testing Pretection Against Accidental Contact E26d PURPOSE: To check protection against accidental contact of caps E26d ...
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 13.2mm For Caps E26d | 7006-29C-2 PURPOSE: To check dimensions Cmax. and C1max. of caps E26d. TESTING: When the unmounted cap ...
E27 Lampholder Gauges | Gauge for Detecting Side-contacts with Cutting-Edges in Lampholders E27 | 7006-22B-1 Purpose: to detect the existance of cutting-edges on side-contact in ...
E27 Lampholder gauges | Gauge For Testing Contact-making and Protection Against Accidental Contact During Insertion Of Lamps in Lampholdes E27-7006-22A-5 Purpose: to check E27 lamp ...
E27 Lampholder gauges | "NOT GO" Gauge for Screw Thread Lampholder E27 | 7006-26-4 Purpose: the check the maximum minor diameter of the screw thread, dimension D1, of lampholder ...
GU10 Lamp cap gauge | Gauge for checking the maximum insertion and withdrawal torques in lampholders GU10 PURPOSE: To check the maximum insertion torque and the maximum withdrawal ...
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 23mm For Caps E26d | 7006-29B-2 PURPOSE To check dimensions Smin., Smax., S1min. and S1max. of caps E26d. TESTING When the ...
E40 Lamp cap gauge | Gauge for testing protection against bulb-neck damage and for testing contact-making in lampholders E40-7006-23-3 Purpose: to check the maximum minor diameter ...
E27 Lampholder gauges | Gauge for Testing Protection Against Bulb-Neck Damage And For Testing Contact- Making in Lampholder E27-7006-21-5 Purpose: to check: a) protection against ...
G5 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check dimensions E min., E max., F min., G max. and the ...
E27 Lamp cap gauge | go gauge for dimension "S1" of E27 caps on finished lamps | 7006-27C-1 Purpose: to check the dimensions S1 minimum and S1 maximum of E27 caps on finished lamps ...