IEC62133 Clause 7.3.7 Lithium Battery Low Pressure Chamber To Simulate High Altitude Testing

Battery Altitude Simulation Tester

Simulate high altitude low-pressure chamber for lithium battery pouch cell safety performance testin

SPECIFICATIONS

Usage:

used for battery test at high altitude and low voltage.It should be tested for 6h under negative pressure of 11.6kPa(1.68psi).Battery qualified without explo-

sion,fire,smoke and leakage.Automatic control of test period(like 6h).Monitor inside voltage change throughout.Test finish when achieving the objective.

Standard basis:GB/T 18287, UL2054, UN 38.3,UL 1642,IEC61960,IEC62133,etc

Structure and Feature:

1. External:high end A3 painted steel sheet with firmcoating and anti-rust capability.

2. Internal:good quality SUS304# stainless steel sheet with fire and corrosion proof and easy cleaning Teflon tape to protect the chamber ultimately.

3. Filling material:ultrafine aluminum silicate wool

4. Front opening double-layer toughened glass viewing window

5. Automatic control of air input and output and constant voltage.Chamber door uses high temperature resistant sillica gel bar which ensure a fine air-proof effectiveness and constant vacuum degree.

6. Safety device:Pre-overpressure device and pressure-relief value

7. Automatic alert:operational mistakes and timeout

8. Built-in vacuum pump,easy to use and move.

Specification:

Internal:SUS201# stainless steel sheet,thickness:4mm;

External:A3 cold-rolled painted steel sheet;thickness:1.2mm;

Pressure range:0.5～100Kpa;

Internal dimension:W300*H300*D300mm

External dimension:W400*H1200*D400

Shelf:stainless steel

Vacuum degree display:pointer type controller

Timer:LED display.Freely set between 0~9999H(H/M/S adjustable)

Voltage Fluctuation:≤5%

Power:AC380V,50HZ,2.2KW;

Note:Operational environment temperature is(20±5)℃ to keep inside temp.

Standard Configuration:

1. Low voltage test host machine:1 set(built-in vacuum pump)

2. stainless shelf:2 pieces

3. operation instruction:1 booklet

4. warranty card:1 pcs

Operation environment:

1. Avoid direct sunlight,high temperature and moisture

2. On stable surface

3. Power:three-phase four-wire system,reliable earthing.

4. Environment temperature is(20±5)℃.