|
[China]
Trade Verify
Address: Zone A, Floor 3, Building 1, Houhai Xufa Science and Technology Park, No.8, Zhenxing Road, Loucun, Xinhu Community, Guangming New District, Shenzhen, Guangdong, China
Contact name:Naomi Zhang
Shenzhen Chebao Technology Co., Ltd |
|
Verified Suppliers
|
|
|
● The lithium battery spot welding machine adopts a pure electric
design without a cylinder, resulting in low noise and stable
pressure.
● It is driven by a motor and precisely controlled by a control
box, offering three adjustable modes.
● The CBLD-26 multi-pulse lithium battery spot welding machine
utilizes a proprietary output energy optimization algorithm,
ensuring reasonable conversion between output voltage and output
current. This results in strong welding capabilities, secure welds,
no false welding, minimal sparks, and excellent surface quality.
● Precisely developed welding heads allow for precise pressure
adjustment and control.
● Microcomputer technology is employed for control.
● Applicable battery specifications: minimum not less than 50MM,
maximum not more than 130MM (can be used for height increase type).
● The welding platform adopts high quality tempered glass to
protect the desktop from wear and tear during the welding process.
● Vertical spot welding method is spot welding, manual control of
pressure depth.
● Digital LED display, equipment parameters adjustment is more
intuitive, easy to learn and easy to operate.
● Welding machine can be pre-stored multiple procedures, can be
changed and called at will.
● Compact structure, small volume, high power, large industrial
circuit design, safe and reliable welding process
1.Adjusting mechanism of welding head.
The welding head can be adjusted up and down to increase the
distance between the desktop and the welding head. Can weld
batteries of different heights and types.
2.Cylinder drive
The air source interface is connected to the pressure regulator to regulate the air source pressure and filter water. The gas is transported to the solenoid valve, which controls the gas drive cylinder and drives the welding head.
3. Electric control
No additional air source required, low noise, fast welding speed, and stable pressure.
| Welding thickness | 0.02-0.18MM | Welding power supply | Multiple-pulse |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 130MM (Maximum pitch adjustable) |
| Supply current | 3000A | Welding speed | 180P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Equipment power | 12KW | Equipment size | 600*900*1300MM |
| Driving mode | Electric | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
