|
[China]
Trade Verify
Address: Zone A, Floor 3, Building 1, Houhai Xufa Science and Technology Park, No.8, Zhenxing Road, Loucun, Xinhu Community, Guangming New District, Shenzhen, Guangdong, China
Contact name:Naomi Zhang
Shenzhen Chebao Technology Co., Ltd |
|
Verified Suppliers
|
|
|
The tester mainly has two functions, namely battery production
testing mode and calibration mode. Therefore, the device can be
used as an electronic load and a comprehensive testing instrument.
The specific testing items include: testing the open circuit
voltage of the battery, AC internal resistance of the battery,
continuous charging current, continuous charging voltage,
continuous discharge current, continuous discharge voltage,
charging overcurrent protection current, discharge overcurrent
protection voltage, short circuit protection time, overcurrent
delay time, and voltage after testing. The device uses an infrared
scanner barcode input (SN) to initiate testing, or automatically
initiates testing when voltage is detected.
Scope of application: Suitable for lithium-ion batteries equipped
with (CH+P+CH-P -) and a full range of power batteries.
| Open circuit battery voltage | Battery AC internal resistance | Continuous charging current |
| Overcurrent delay time | Continuous discharge voltage | Continuous discharge current |
| Short-circuit protection time | Discharge overcurrent protects the current | |
| Post-test voltage | Charging current Protects the current | |
| Voltage range :0-100V | Resolution :1mV | Accuracy :0.1%RD+0.1FS |
| Internal resistance range :0-2000MQ | Resolution :0.001MQ | Accuracy :0.1%RD+0.1FS |
| Charging current :0-300A | Resolution :0.001A | Accuracy :0.1%RD+0.1FS |
| Discharge current :0-500A | Resolution :0.001A | Accuracy :0.1%RD+0.1FS |
| Overcurrent delay time :0-30S | Resolution :2mS | Accuracy :0.1%RD+0.1FS |
| Short circuit time :0-2000uS | Resolution :1uS | Accuracy :0.1%RD+0.1FS |
| NTC range :0-100K | R1 range :0-100K | Equipment operating voltage :AC200V-240V |
| Maximum working power :5000W(maximum current charge) | Maximum working power :5000W(maximum current charge) | |
Battery pack welding completed BMS -- comprehensive tester select the correct test template -- Connect P+/C+/P-/C -- Special crocodile clamp for testing -- Connect NTC special crocodile clamp -- Click Start test
