|
[China]
Trade Verify
Address: 301, Building 1, Hengfa Industrial Park, Jutang Community, Fucheng Street, Longhua District, Shenzhen
Contact name:Luo
Shenzhen Xindaneng Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
100V 20A Charge Battery Pack Tester Automotive Battery Tester Analyzer
1. Equipment introduction
Comprehensive test equipment is a device that quickly and accurately tests the performance of finished batteries , Compared with similar equipment , fast test speed , high test accuracy , support multiple devices at the same time
2. Function Introduction
| Product Model | Battery integrated tester BTS100-20-200 |
| Use | For semi - finished products and finished product testing of battery pack below 100V |
| Basic Function | Open circuit voltage test |
| Communication internal resistance test | |
| ID resistance test | |
| NTC resistance test | |
| Charging Performance Test | Battery PACK continuous charging function , to verify that the charging is normal |
| Battery PACK charge over - current protection function test | |
| Discharge Performance Test | Battery PACK continuous load capacity , continuous discharge check voltage drop |
| Battery PACK discharge overcurrent protection function test | |
| Short Circuit Protection Test | Test battery positive and negative short - connected battery cut - off protection time ( subtle level ) |
| Equipment Protection Function | Software protection function power data protection |
| Hardware protection. Power loss protection , short circuit protection , battery connection , wrong protection |
3. Environmental Requirements
No strong vibration environment , no corrosive gas and flammable and explosive gas existence
4. Device Parameter Description
| Test Class | Test item | Measuring range | Resolution ratio |
| Open Circuit Voltage | Open circuit voltage 1 | 10-100V | ±2mV |
| Open circuit voltage 2 | 10-100V | ±2mV | |
| Communication internal resistance | Communication internal resistance test | 0-1000mΩ | ±1mΩ |
| Discharge test | starting voltage | 0-100V | ±2mV |
| End voltage | 0-100V | ±2mV | |
| discharge current | 0.1-100A | ±1mA | |
| discharge time | 0-60S | ±1mS | |
| Discharge perflow test | Over-discharge current | 10-200A | ±1mA |
| Overflow delay | 0-30S | ±1mS | |
| Short - circuit protection | Short circuit protection delay | 0-9999uS | ±1uS |
| Charging Test | starting voltage | 10-100V | ±2mV |
| End voltage | 10-100V | ±2mV | |
| charging current | 0.1A-20A | ±1mA | |
| charging interval | 0-60S | ±1mS | |
| Charging Protection Test | Charging over the flow | 4-20A | ±1mA |
| Charging delay | 0-20S | ±0.1mS |
