The Continuous Mesh Belt Drying Machine / Belt Dryer Machine / Belt
Drier Machine is conceptually very simple. Product is carried through the dryer
on conveyors and hot air is forced through the bed of product. It
is often described as simply a conveyor in a box with hot air. The
reality, however, is that the belt dryer is one of the most
versatile dryers available. Few drying technologies can match the
belt dryer`s ability to handle such a wide range of products.
Products as varied in composition, shape, and size as coated
breakfast cereals, nuts, animal feed, charcoal briquettes, and
rubber can be dried in a conveyor dryer
Mesh Belt Drier: The material is distributed to the mesh belt
evenly by the feeder. The size of stainless steel mesh is 12-16mm
mesh. The transmission device will moves the mesh belt around the
dryer. The Belt Dryer consist a several drying units and each unit
has individual hot air circulation system. Part of the exhausted
gas is exhausted by an exhaust fan. The waste gas is controlled by
an adjusting valve. The hot air will move up and down when the
material moving from the top layer to the bottom layer. This
process will evaporate the water from the material when the mesh
belt moves slowly. The running speed of the conveyer belt can be
adjusted according to the material property. The dried material
will be automatically discharged to a collector. The circulation
units can be equipped according to the user`s requirement and the
Conveyor Belt Dryer is a special equipment on the basis of
traditional net belt dryer.It has stronger pertinency,practiability
and high efficiency of energey.The third generation DW series dryer
for vegetable dehydration has been developed.According to the
characteristics of raw material to be dried and the process
requirements of customers and combined the accumulated experience
for more ten years,we have made the most suitable and the best
dryer for vegetables dehydration for customers
Attentions to Order
(1). Name of liquid materials, nature, solid content (or moisture
content), viscosity, surface tension, PH value.
(2). Volumetric weight after drying, allowable residue moisture,
granularity, allowed high temperature.
(3). Production, total shift hours per day.
(4). Available energy resource and volume of steam, power supply
capacity, available volume of coal, oil and steam.
(5). Control requirement: If inlet and outlet temperature are
needed automatic controlled.
(6). Requirement of powder collection: If bag collector is needed
to install, environmental requirement of tail gasherbal The dewater
1.the materials will put on the belt and materials do not moved on
the belt ,so It belongs to static dryer. So the shape of raw
material to be dried should not be destroyed.
2.The equipment has no dead corner so it is easy to clean fully and
there is no cross pollution;
3. Machine materials : AISISUS304 , AISISUS316L, and other material
4. For the electrical component , we mainly use international brand
such as ABB ,Siemens or Schneider.
5. Control system has more choices, such as push button , HMI+PLC
and so on.
6. Fan speed is controlled by VFD (Optional), and it can adjust the
air volume .
7. Belt speed is controlled by VFD (Optional), and it can adjust
the drying time base different moisture of materials.
Fruit Belt Dryer - DW Belt Drying Machine is suitable for the materials, such as de-watering de-watering
vegetable, herbal medicine of traditional Chinese medicine and
others, for which the water content rate is high and the high
temperature is not allowed. The machine owns the advantages, that
its drying speed is fast, the evaporation strength is high and the
product quality is good. The de-watering filtering cake state paste
material, after the particle makeing or bar making, can be dried