Active Member
|
[China]
Address: Room707, Jude Commercial Building, South Zhengfeng Road, Fuyong town, Baoan District, Shenzhen, Guangdong, China
Contact name:Alan Chang
Shenzhen Mingyang Digital Technology Co.,Ltd |
|
|
Automatic Low Cost Hot Air Vinyl Flex Banner Welding
Machine / Air Welder Machine
Advantage of Banner Welding Machine :
►No need glue, Just use hot air to welding materials , low cost
►Welding Temperature, speed, fan motor speed are
adjustable
►Welder nozzle has a sensor, can make the true temperature
accurately
►High welding quality and efficient .
►Easy to operation and good welding effect
Main technical details of Banner Welding Machine :
►Warranty: One year ►MOQ: One set of banner welding machine ►Rated voltage: 110V / 240 V ►Frequency: 50-60 HZ ►Power: 1600 W ►Temperature scope:10-500℃ ►Speed scope: 5-15m/min ►Dimension: 480*320*330 mm ►Weight: 10 kg ►Splicing width: 2-4 cm ►Welding Thickness: 0.22-2 mm ►Welder wire: 10 meters (the longest) ►Welder wheel: Aluminum wheel |
Operation Step of Banner Welding Machine :
| step 1 | Before hemming or welding, leave 30-40mm wide overlap edge for connection the two disjunct surface pieces, immobilize both ends of each disjunct pieces with something such as stick belt or clamp |
| step 2 | Turn on the power, according to quality and thickness of the PVC banner, consider the ground circumstance, set the proper termperature and speed, adjust the suitable hot-air blowing rate, wait for machine hot up around 2 minutes |
| step 3 | Bring up the machine, place the rubber wheel at the end of the overlap edge |
| step 4 | Turn the handle to left down, insert the welder nozzle into the gap of two overlap pieces, then the machine will moving and seaming automatic |
| step 5 | During welding, use the gripe to align the moving direction, let the upper piece edge be in touch with the inner side of the welder nozzle |
| step 6 | After the machine go pass the overlap edge to the end, the two disjunct pieces will be joined together, then turn the welder handle to right, it will stop moving |
| step 7 | Turn off the heater switch, wait the gun come to cold, then turn off the power supply is ok |
Notice of Banner Welding Machine :
►To prolong the electrothermal heater, after work it is strongly
advice that cooling the heater at first, then turn off the power 5
minutes later. In case of the power suddenly be off, should handle
the welding gun away firstly, and close down the temperature knob,
nextly consider the problem of power supply.
►To get better satisfied bonding effect, the ground of the overlap
pieces should be smoothly, hard and heat resistive. We suggest that
the operator may do some more test and practice using some samples
of the pieces to get the suitable speed and temperature and hot-air
blowing rate before operate it for seaming formally
FAQ :
1. Q : What's the Function ?
A : The Function is : Welding PVC / Flex Banner , Plastic and other
materials can be hot melt .
2. Q : What's the MOQ ?
A : The MOQ is one set of Welding Machine .
3. Q : Is it automatic welding ?
A : yes , It is automatic welding banner .
4. Q : How long is the warranty period ?
A : The warranty is 12 months .
5. Q : How can i pay ?
A : Our company accept : T/T , Western union , Paypal .
6. Q : What time will delivery the Banner welding machine after
payment ?
A : We will delivery the Banner welding machine in 3-5 working days
after you payment .
Company Information :
Shen zhen Ming Yang Digital Technology Co.,Ltd
We are a Professional Export Trade Company , With 7
years experience , Sale many kinds of machine and materials about
the Advertising Industry .
We Assure you :
With good quality Banner Welding Machine
Offer Best Price to you
Arrange the Fast delivery
Provide good after-sales service
How to Contact us ?
Send your Inquiry Details at the below , Click " Send " Now !
