Active Member
|
[China]
Address: Room707, Jude Commercial Building, South Zhengfeng Road, Fuyong town, Baoan District, Shenzhen, Guangdong, China
Contact name:Alan Chang
Shenzhen Mingyang Digital Technology Co.,Ltd |
|
|
15m/min Speed Portable Heat Seaming Machine / Welding Machine For Banner
This Machine is designed professionally for seaming PE , PVC and painting banners .
Machine Details :
| Welder model | Top 2000 C |
| Welder air gun | L eister hot air gun |
| Welder Warranty | One year |
| Welding width | 2-4 cm |
| Welding thickness | 0.22-2mm |
| Welding temperature | 350-400 degree ( normal ) |
| Welding power | 1000-3000W |
| Welding Voltage | 110 V/220 V |
| Welding Frequency | 50-60 HZ |
| Welding Speed | 1-15m/min |
| Welder wheel | Aluminum wheel |
Operation Step :
Step 1 :
Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
Step 2 :
The overlap width of the two pieces is about 3-mm, the width of the nozzle of hot seaming machine.
Step3 :
Put the machine nozzle between two overlap pieces.The press-wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
Step 4 :
Switch on the motor power and then adjust speed.
Step 5 :
Turn on the movement switch.
Step 6 :
Press heating power key to adjust temperature.
Step 7 :
Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
Step 8 :
Turn the bar by clockwise to cease the automatic work.
Step 9 :
The operator should control the moving direction and make sure the nozzle connect both with upper and under piece of cloth
Operation Notice :
► During operating, if the surface cloth is dissolved and scorched or the cloth are not sticked together, please stop to adjust the temperature or speed.
► During operating,if the seaming part is not in right position, please stop to adjust fixing position.
► During operating, make sure clothes are flat so that stick together smoothly.
► The hot wind of heater cannot touch the press-wheel or the rubber of press-wheel is easy to be burned down.
► Adjust temperature to zero before turn off the heater.Switch off after 5-10 minutes
FAQ :
1. Q : What is the use of the machine ?
A : Use hot air to make the PVC Banner welding together |
2. Q : What's the machine work type ?
A : It's Automatic welding |
3. Q : How long is the warranty period?
A : The Warranty is one year |
4. Q : Which kinds of hot air gun it use ?
A : Leister hot air gun |
5. Q : What kinds of materials can it welding ?
A : It can welding PVC / Banner / Flex and other outdoor materials can be hot melt |
