|
[China]
Trade Verify
Address: Binhai New Industrial Estate ,Pingyang County ,Wenzhou city,Zhejiang ,China
Contact name:Sara
Zhejiang Allwell Intelligent Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
ON-WSA Paper Valve Bag|Woven Sacks Making Machine Manufacturer & Supplier In China With Patent Design
Industry bag
Valve bagging is when a bag is filled using a specialized machine. The machine uses a spout placed in or near the opening of the bag. A measured amount is placed in each bag. This can be done in a fully automated or semi-automated manner. This ensures consistency in quantity and minimizes lost product.
1.Machine specification:
| I．Technical Parameter | |
| Sack width | 300-600 mm |
| Sack length | 410-910 mm |
Bottom width(B > 160 mm) | 80-180 mm |
| Bottom center distance | 310-680 mm |
| Main fabric cutting length | 510-1090 mm |
| Fabric width | 55-80cm |
| Coating Weight(15% PE, 85% PP) | 17-30 g/m² |
| Speed | 90-120 个/min |
| 2.Material Specification | |
| 2.1Tubular fabric requirement | |
| Material specification | 2.5-5 mm PP tapes |
| Fabric Weight | 55-80 g/m² |
| Coating Weight | 17-30 g/m² |
| Coating adhesion | Min. 8.1N/30mm |
| Width tolerance | ±7 mm |
Weight tolerance (fabric + coating) | ±3 g/m² |
| Over coating | Max. 5mm |
| 2.2Flat fabric for patches | |
| Fabric Weight | 55-80 g/m² |
| Coating Weight(15% PE, 85% PP) | 17-30 g/m² |
| Coating adhesion | Min. 8.1N/30mm |
| Width tolerance | ±3 mm |
Weight tolerance (fabric + coating) | ±3 g/m² |
Electrical,water,air requirement | |
| Power | 105 KVA |
Water consumption (Max 18°C, 4 bar) | 2m³/h |
| Operating pressure | 6-7 bar |
| Air consumption | 120 m³/h |
| Air compressor | Prepared by customer |
2.Machine Drawing
3.Wearing Parts
Wearing Parts (as listed in detail in the operating manual) intended for commissioning and installation shall remain on customer’s premises after finalization of commissioning and installation and may be used by customer in case of necessity. However seller assumes no warranty or guarantee whatsoever for said Wearing Parts and shall in no event be obliged to replace said Wearing Parts after their use by customer.
4.Valve sack bag samples
