Baby Keepsake Box 3D Baby hand and footprint frame Customized DIY
Newborn Gift
| Product information |
| Product Name | Baby Keepsake Box 3D Baby hand and footprint frame Customized DIY
Newborn Gift |
| Frame Size | 40 x 25 x 6.8 cm | Product Material | Pine wood |
| Function | Gift | Product Color | Wooden, White or customized |
| Powder weight | 1.5 kg | Product MOQ | 500PCS |
| Application | Baby memory gift | Clay color | White or customized color |
| Packaging | Color box | Sample details | Sample cost:70USD
Shipping by DHL
Shipping time:3-5 days. |
| Accessories | Clay, pthoto frame |
| Lead Time | 30 days | Deliver Time | 25-30 days |
| Specifications |
- frame
- molding powder - clone powder - golden painting
- small stick
- double sided tape
- instructions
- custom box |
Product Introductions :
Baby keepsake box is a meanful gift for baby and a family, Many
years later, when you have grown up, you have faded away from the
cute appearance. I will carefully pick up the photo frame on the
table, which contains a little cute, I only hope that you will grow
up slowly.
No matter how far you go in the future, every time I touch this
memory, I can feel the sweetness you bring.
Your first cry made me wet my eyes. Since then, my life track has
changed. Your crying, your smile, every bit of it wants to be
preserved, leaving you a gift for growth after many years
Product Information
1 ) baby name : child 3D hand and foot print set (square)
2 ) Photo Frame Size : The outer frame is about 40 x 25 x 6.8cm, and the hollow thickness
is about 6.8cm.
3 ) Photo frame texture : white frame polymer environmental protection material, black,
walnut color, wood color frame for high density board wood, both
materials are not deformed without cracking
4 ) Photo Frame Type : can be placed directly, without bracket, not pendant
5 ) set content :
- Three-dimensional thickened photo frame 1 set
- Membrane powder 1 packs 150g + molding powder 1 packs 200g, 2
packs can be made as shown in Figure 2, and 1 pack is used for
practice.
- Golden pigment, silver pigment optional
- Brush one
- A piece of glue
- A detailed description
How to Make 3D Mold :
Step 1 ) Pour 50g of cloned powder into a graduated cup containing 300ML of
water (water temperature is preferably 25-35 degrees), and quickly
stir it with a stir bar for 40-60 seconds. The stirring method
is preferably egg-type stirring. The higher the water temperature,
the faster the cloning powder solidifies.
Step 2 ) The stirred cloning powder slurry is shaken a few times to make
the bubbles float up, and poured into the cup, put the baby's hand
into the cloning powder slurry, and stand still for 2-3 minutes (do
not let the baby hand touch the cup) Wall), you can apply some
moisturizer to your baby's hand before putting it into the cloning
solution.
Step 3 ) First press the cloned powder slurry to completely solidify, then
shake the baby's hand up and down, so that the air slowly enters
and slowly take out the baby's hand. Remember to be careful and
careful, take out the mold and prepare it (in the process of taking
the hand must be Be slow, don't worry, prevent damage to the
already cloned clone model)
Step 4 ) First, fill the solidified clone powder model with water and then
pour the water out to another container. Divide the poured water
into two. The amount of the model powder is 2.5-3 times the half
volume of the baby hand (the volume of the baby hand = the volume
of the poured water), and it is fully stirred for about 1-2
minutes. After the stirring, the mixture will be The model slurry
is shaken a few times to make the bubbles float.
The ratio of baby's hand clone powder to water is: 50G clone powder
+ 300ML water
Step 5 ) The fully stirred model powder slurry is shaken vigorously for a
few times to float the bubbles and then inject the model slurry
into the already solidified clone powder model, and shake evenly to
reduce the bubbles (the baby's fingers are naturally slightly
curved, and the model powder cavity should be First, it is inclined
to form a small amount of filling mold. After a few seconds of
static injection, the mold is filled. If the baby's finger is
fist-shaped, first apply a small amount of filling in the direction
of the baby's finger, then put the cloned powder cavity upside down
for about one minute before continuing to mold.
Step 6 ) Pour out the solidified clone powder model, and slowly peel off the
model of the solidified baby hand from the clone powder model. Pay
attention to the moderate intensity, don't worry.
FAQ:
1.Q:Are you a factory or trading company?
A:We are a factory with excellent price-performance ratio of items.
The larger your order quantity is, lower the unit price will be.
2.Q:What information should I provide for making my own plate and
trays?
A:Tell us the styles or forms,material,dimension,surface
process,printing requirement,and quantity of your items.
3 Q:Do you have MOQ?
A:Depands on different ideas, Can be negotiated.
The larger the quantity is, the competitive the unit price will be.
Depands on different ideas, Can be negotiated.
4.Q:Can you help with the design?
A:Yes,we have professional designers offering free designing
service.
If you can provide artwork or pictures,please send them to us in
the following formats:cdr,eps,jpg,ai,psd,pdf.
5.Q:When can I get the quotation?
We usually quote within 24 hours after we get your inquiry. If you
are very urgent to get the price, please call us or tell us in your
email so that we will regard your inquiry priority.
6.Q:Shall I need to prove the brand/logo ownership and offer the
certificate of authorization?
A:Yes, and we make your items after receiving the certificate of
ownership and authorization.
7.Q:Can I get a sample,is that for free?
A:Samples in stock can be sent to you directly after you pay the
freight. Only printing fee and mould charge you need to pay for in
making samples.
8.Q:What about the lead time for bulk production?
A:It depends on the order quantity and the production season.
9.Q:How long can I get the sample?
A:After we receive the relevant expenses,samples will be ready and
sent to you via express in 7-10 workdays.
10.Q:What payment methods do you accept?
A:We support T/T,and L/C and so far.
