Active Member
|
[China]
Address: Buiding A, No.138, Santun Industrial Boulevard, Houjie Town, Dongguan,Guangdong,China.
Contact name:manager
Shenzhen Green Source Light Equipment Co., Ltd. |
|
|
FAA L-810 IP67 3W Low Intensity Obstruction Light
| Specification | |
| FAA Classify: | L-810 |
| Type: | GS-LI/B GS-LI/A |
| Operating Voltage: | AC 85V~264V |
| Power Supply Frequency: | 50Hz～60Hz |
| Power Consumption: | ≤3W |
| Working Mode: | Steady burning, or flashing 20~60 times/min |
| Light Intensity: | Type B ≥32.5cd Type A≥10cd |
| Horizontal Out-put: | 360° |
| Vertical Divergence: | 10° |
| Light Source Service Life: | ≥20 years |
| Emitting Color: | Red |
| Overall Size: | 143mm×143mm×125mm |
| Installation Size: | 3/4inches or 1 inch, chassis install |
| IP Protection: | IP67 |
| Optical Ambient Brightness: | 50/100Lux |
| Ambient Temperature: | -40℃～70℃ |
| Weight: | 1.2kg |
| Anti-wind Ability: | 120m/s |
Features
1. Integrated reflective optical structure, more uniform
luminescence, lower power consumption.
2. Bird spike against bird drop.
3. International-advanced cold LED with low power consumption, high
brightness and service life of light source reaching 100,000hours.
4. LED based on obstruction light last 15 times longer than
traditional light source, incandescent light.
5. About 96% less power than 116W incandescent light.
6. Major maintenance cost saving,Surge protection device inside
light.
7. Strong corrosion resistance, Shock and Vibrations protection and
UV protection.
8. Dawn to Dusk operating: Built-in photocell can let light work
automatically at night, closed during the day.
9. 3/4inch or 1inch installation size and small volume especially
being suitable for telecom and flag-pole installation way,and can
be installed with base, can raise the strut.
10. There is one switch converting between Flashing mode and
Steady-burning mode.
11. Five Years Warranty Period.
Attention / Usage Tips
1. Check whether the supply voltage does comply with the rated
voltage of device.
2. Do not open it if the device is out of operation, in order not
to be hurt by the internal high pressure.
3. After finished the installation, the personnel must check
whether the device is in a good waterproof processing and whether
the screw spikes are tight
4. Non-professional workers cannot do the device maintenance, in
order not to expand the error and be hurt.
Application
Block
Airport
High Mastlamp
Chimney
Bridge
Telecom towers, GSM towers, Electric towers
High-rise Buildings
Drawing
