Active Member
|
[China]
Address: Room D-011 No. 517 Ming-ze Peninsula Luoshi South Road, Hongshan District, Wuhan City
Contact name:Cassie Xiong
Wu Han Micro Control Electric Co., Ltd. |
|
|
Portable Measuring Tension Amplifier Analog Signal DC 24V With Plastic Cover Tension Transducer
Measuring Amplifiers Tension Amplifier DC24V With Two Load Sensors Alternative Erhardt-Leimer
Measuring amplifiers ensure a stable bridge supply voltage, They amplify the output signal of the load sensors to a standard signal .
STA-05 Intelligent tension transducer
Features:
1. Key intelligent operation,outside without adjust potentiometer.
2. Hardware and software to restrain power frequency interference, output steady and reliable.
3. Adapt DIN-rail mounting,easy and convenient.
4. Adapt SMT ,small size,light weight.
5. Tension controller with STS ans STSA for option.
| Parameters | ||
| Model | STA-05C | STA-05B |
| Power Supply | DC 24V | |
| Input Analog singal | L+~L-;R+~R-;Left,right STS tension loadcell signal (0~200mv,power supply DC5V) | L+~L-;R+~R-;Left,right STSA tension loadcell signal (0~15mv;power supply DC5v) |
| Control output | 1. Vout-GND:DC0~10V/0~5V 2. Iout-GND:DC0~20mA | |
| Fixed output | 5V+-GND:DC5V tension loadcell power supply | |
| Outline size | 115x100x23 | |
Features:
32 bit CPU guarantees high speed, precision, ant-ijamming capability and ensures reliability.
The outside has no adjustable potentiometer.
The tension sensor can select Differential sensor or Strain- gauge sensor.
0~ 10V/ 0~ 5V and 0~ 20mA output signals can be p-rovided to PLC and display instrument.
Use dispensing technology, small volume, light wei-ght.
Using DIN rail mounting, simple and convenient.
Product category:
STA - 05B : Using strain - gauge sensor , input signal r - ange - 5mv ~ + 10mv.
STA - 05C : Using differential sensor , input signal ran - ge - 100mv~ + 200mv
Replaceable for Amplifier
The LE-50PAU power amplifire is a compact typeunit designed to be
incorporated in the panel, using aluminumdie cast and plastic
cover.
(1) Mounting holes arranged at four corners of the main unit,
used to fix the unit within the control panel.
(2) Transparent cover prepared for display unit and operation
key.
(3) 4-digid red 7-segnent display unit used to display the
output current / voltage, or to execute each
setting operation.
(4) operation key used to set the input signal level,
non-linearity data, stop gain, stop bias, stop timer,
etc.
(5)’ Side cover.
(6) Panel cover. Each cover can be opend by inserting the
pawl in the position marked with arrowhead.
(7) Transparent cover for terminal block.
(8) Termanal block for input / output and power source. When
the right / left mounting screw ara loosened
evenly, it is possible to remove the entire terminal block.
(9) Small window cover for DIP switch. The cover is opend, to
see the DIP switch. The DIP switch is
used to set each mode or full-scale value of output current.
(10) Type LE-5AP operator panel connecting connector. The
cable is connected by opening the side
cover
(11) LED used to display the power source and cach status.
FAQ
1. When can I get the quotation?
We usually quoted within 12 hours after receiving your inquiry. If
you are very urgent to get the price, please call us or tell us in
your email, so that we can regard your inquiry priority.
2. How should I place the order?
Please let us know the model number based on our specs for tension
controller,web guiding system. For powder clutch, powder brake,
please show us your drawing, or let us know your request torque,
and then we will provide you suitable model for confirmation.
3. What’s your MOQ basis?
Normally, we don’t have MOQ request.
4. What about the lead time for production
Honestly, it depends on the order quantity and the type of our
products. For tension controller, load cell and edge position
controller which is about 1-3 days. For powder clutch, powder brake
which need about 3-5days.
5. What is the term of delivery
We can arrange with EXW, FOB, CIF…etc. You can choose the most
convenient one or cost-effective way.
