Color Steel Double deck Roofing Sheet Roll Forming Machine For 0.3-0.8 mm thickness

No

          Technical Specification

1

Manual Uncoiler

Usage:It is used to support the steel coil and uncoil it in a turnable way

The steel coil is uncoiled by hand. Loading capacity:5T, Inner diameter: 500-508mm

2

Feeding Table

Put the raw material(steel plate) through the beach to manufacture and process

It can guarantee that the products are neat

Parallel and everything is uniformity

Please refer to the equipment regulation to know the function of locate angle iron.

3

Main Roll Forming Machine

Material of rollers:45# steel,roller surfaces polishing, hard plating

The polished surface and the heat treatment towards the molds also can keep the molding

Plate surface smooth and not easy to be marked when it is being stamped

4

Hydraulic System

Computer Control Cabinet

Power:4kw,Hydraulic oil: 40#

Hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.

The target piece`s length is adjustable and digit of it can be adjusted

Computed mode has two modes: automatic and manual one

The system is easy to operate and use

PLC:EURA

5

Shearing Mechanism

It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.

Material of blades: Cr12,quenching treatment

6

Output Table

It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products