Cu Unix Soldering Tip P1V08-10 P1V10-20 for Welding

Handif Customized unix P13DVAP Head Welding Tip, soldering iron tip replacement

use the tip to pay attention to:

1. When using a new tip, since the blue resin in the front section of the tip will fall off as the temperature rises, quickly activate the tin surface with sufficient spare solder. The same is true in the absence of blue resin.

2. When attaching flux such as flux to the front of the tip, wipe it gently with a damp sponge or the like; if it is wiped with a dirty or dry sponge, or if it is excessively wiped, it may cause tin to stick.

3. Since iron plating can improve the durability of high temperature resistance, it is strictly forbidden to remove the iron plating layer.

4. To ensure the integrity of the tin surface, when suspending or ending the soldering operation, place or store the tin surface of the soldering iron tip with tin.

Health and safety considerations

1. Since the molten solder temperature is quite high (above 300 °C), please be careful not to touch the skin with the splash; after use, please note that the soldering iron will still maintain high temperature. If it is burned, please consult a doctor promptly.

2. Direct inhalation of smoke or steam generated during soldering and long-term inhalation may cause headaches and other health problems; a large amount of inhalation may become one of the causes of edema; soldering operations should be carried out in a well-ventilated place for a long time. It is recommended to install a local exhaust.

3. Please pay careful attention during soldering. Do not directly contact the flux and solder vapor to the skin. Please use protective equipment as needed. Since the flux adheres to the skin and causes inflammation, please rinse it off quickly with water. If you enter the eye, please wash it immediately with running water. Please consult a doctor if necessary.

Professional MRO procurement, soldering iron head, soldering accessories, AI-SMT accessories, factory direct sales, full range, welcome to buy, the main brands are as follows:

Tips: Apollo DCS DCN, Uni, Express 911G, Wilo, etc.

Universal plug-in machine models: 6241F, 6241, 6380A, 6380B, 6287, 6292, 6295, 6360, 6296, etc.

TDK plug-in machine models: VC-21, VC-7, etc.

DANAPERT plug-in machine models: VCD, marker, etc.

Panasonic plug-in machine models: RL131, RL132, AVK, AVK2, AVK2B, AVK3, AVF, JV, RH3, RH6, RH5, AVB, RHS, RHSG, RHS2B, NB168 plug-in machine accessories, JV131, AV131, AV132, JVK, JVK3 , RH2, RG131, JVK2, RHSG, etc., the full range

Xinze Valley plug-in machine models: XG-3000, XG-4000, XG-2000, XG-1000, XG-3300, etc.

Domestic plug-in machine models: Aesawa, Zhonghe Xu, and West, Insett, etc.

SMT machine main: a variety of film nozzles, filter cotton, cutting knives, Feida, Feida accessories, belts and so on.

More product details:

Phone: 13728690324

Tip analysis: