|
[China]
Trade Verify
Address: #161,ZhongFeng Street,New District,Suzhou,215129,China
Contact name:Sean Zheng
Retek Motion Co., Limited |
|
Verified Suppliers
|
|
|
D70 Series Automotive DC Motors Smooth Running For Indoor Exercise
Machine 70ZYT
φ70mm OD: D70 Series 70ZYT DC Motors for indoor exercise machine
thrower machines
Our dc motors are a cost-effective solution when standard AC power
is not accessible or needed. They feature an electromagnetic rotor
and a stator with permanent magnets. The industry-wide
compatibility of an Retek brushed dc motor makes integration into
your application effortless. You can choose one of our standard
options or consult with an application engineer for a more specific
solution.
Typical Application:
Gearmotor, linear actuator,power tool, spreader,auger,indoor
excercise machines, automations and so on.
Features:
Low Noise, Long lifespan, Cost less and Save more for your
benefits.
Specification:
| Shaft Material | SS303, SS304, #45 Steel, Cr 40. |
| Frame Surface Treatment | Powder Coating, Electro phoresis surface treatment. |
| Magnet material | Hard Ferrit or rare earth |
| Armature Design | Skewed Slots Rotor Design for smooth running. |
| Number of Poles | 2/4 |
| Insulation Grade | Class F |
| Frame diameter | 70mm |
| Power range | 50W~300W |
| Voltage | 12VDC~230VDC |
Typical Technical Performances:
| Type | Rated Voltage (VDC) | No-load Speed (r/min) | No-load Current (A) | Rated Speed (r/min) | Rated Torque (N.m) | Output Power (W) | Rated Current (A) | Stall Torque (N.m) | Stall Current (A) |
| D71110A-24 | 24 | 2000 | 0.4 | 1600 | 0.2 | 33 | 2.4 | 1 | 9.5 |
| D71110B-24 | 36 | 3000 | 0.5 | 2400 | 0.24 | 59 | 3.5 | 1.2 | 14 |
Drawings:
FAQ
1. What are your prices?
Our prices are subject to specification depending on technical
requirements. We will make offer we clearly understand your working
condition and technical requirements.
2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum
order quantity. Normally 1000PCS, however we also accept the custom
made order with smaller quantity with higher expense.
3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of
Analysis / Conformance; Insurance; Origin, and other export
documents where required.
4.What is the average lead time?
For samples, the lead time is about 14 days. For mass production,
the lead time is 30~45 days after receiving the deposit payment.
The lead times become effective when (1) we have received your
deposit, and (2) we have your final approval for your products. If
our lead times do not work with your deadline, please go over your
requirements with your sale. In all cases we will try to
accommodate your needs. In most cases we are able to do so.
5.What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or
PayPal: 30% deposit in advance, 70% balance before shipment.
