|
[China]
Trade Verify
Address: #161,ZhongFeng Street,New District,Suzhou,215129,China
Contact name:Sean Zheng
Retek Motion Co., Limited |
|
Verified Suppliers
|
|
|
D2847PLG: DC Gearmotors for Automatic Doors,Automobiles,Actuators and Automated Devices.
The DC gear motor, is based on the ordinary DC motor, plus the supporting gear reduction box. The function of gear reducer is to provide lower speed and larger torque. At the same time, different reduction ratios of the gearbox can provide different speeds and moments. This greatly improves the utilization rate of DC motor in the automation industry. Reduction motor refers to the integration of reducer and motor (motor). This kind of integrated body can also be called gear motor or gear motor. Usually, it is supplied in complete sets after integrated assembly by a professional reducer manufacturer. Reduction motors are widely used in steel industry, machinery industry and so on. The advantage of using reduction motor is to simplify the design and save space.
Features:
Low Noise, Long lifespan, Cost less and Save more for your benefits.
Specification:
| Voltage Range: | DC 3V/6V/12V/24V |
| Output Power | 2.8W~9.4W |
| Stall torque (mN.m) | 25~55 |
| Optional shaft material | #45 Steel, Stainless Steel, Cr40 |
Typical Application:
Gearmotor, linear actuator,power tool,automated devices
Drawing:
Motor Technical Data:
| TYPE | Rated voltage VDC | No-load speed r/min | No-load current mA | Rated speed r/min | Rated torque m.Nm | Output power W | Rated current mA | Stall torque m.Nm | Stall current A |
| D2847-2450 | 24 | 5000 | 80 | 3800 | 7 | 2.8 | 230 | 25 | 0.7 |
| D2847-2467 | 24 | 6700 | 100 | 5100 | 15 | 8 | 460 | 55 | 1.8 |
| D2847-24100 | 24 | 10000 | 160 | 7500 | 12 | 9.4 | 730 | 45 | 2.2 |
Gear motor Technical Data:
| Reduction ratio | 3.7 | 5.2 | 14 | 19 | 27 | 51 | 71 | 100 | 139 | 189 | 264 | 369 | 516 | 720 |
| Number of gear trains | 1 | 1 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 |
| (L) Length(mm) | 31 | 31 | 40.1 | 40.1 | 40.1 | 49 | 49 | 49 | 49 | 57.9 | 57.9 | 57.9 | 57.9 | 57.9 |
| No-load speed (r/min) | 1348 | 965 | 357 | 263 | 185 | 98 | 70 | 50 | 36 | 26 | 19 | 14 | 10 | 7 |
| Rated speed (r/min) | 1024 | 734 | 271 | 200 | 141 | 75 | 54 | 38 | 27 | 20 | 14 | 10 | 7 | 5 |
| Rated torque (mN.m) | 0.02 | 0.03 | 0.08 | 0.11 | 0.15 | 0.26 | 0.36 | 0.5 | 0.7 | 0.86 | 1.2 | 1.7 | 2.3 | 3 |
| mN.m Max. permissible load in a short time | 1 | 1 | 3.5 | 3.5 | 3.5 | 7.5 | 7.5 | 7.5 | 7.5 | 9 | 9 | 9 | 9 | 9 |
