|
[China]
Trade Verify
Address: #161,ZhongFeng Street,New District,Suzhou,215129,China
Contact name:Sean Zheng
Retek Motion Co., Limited |
|
Verified Suppliers
|
|
|
1 / 2HP Fan Blower Motor Condenser Blowers 115VAC 60Hz Permanent Split Capacitor
Direct Drive Blower Motor PSC 1/2HP air vents blower fans condenser blowers 115VAC 60Hz
Typical Application:
Blowers, Fans, Ventilation Facilities
Critical Feature:
Direct Drive Blower Motor, Motor Application HVAC/R, Motor Sub Application Direct Dr Fan/Blower, Motor Type PSC, Enclosure Open Air-Over, HP 1/2, Nameplate RPM 1075, Voltage 115, Full Load Amps 6.5, Hz 60, Phase 1, Frame 48Y, Service Factor 1.0, Max. Ambient Temp. 40 Degrees C, Insulation Class B, Duty Continuous Air Over, Number of Speeds 2, Mounting Ring/Stud/Band, Bearings Sleeve, Thermal Protection Auto, Rotation CW/CCW, Body Dia. 5-5/8", Length Less Shaft 5-7/8", Shaft Dia. 1/2", Shaft Length 4", Capacitor Included No, Capacitor Required 2MDV7, Resilient Ring Dia. 2-1/4", Ring to Ring Center 5-7/16", Stud Pattern 3-5/8 x 3-5/8", Stud Size #8-32 x 5/8", RPM Range 1001-1100, Standards UL Recognized, CSA Certified, Application Direct Drive Furnace Blowers, Unit Heaters, Air Conditioners, Many Other Shaft Mounted Fan and Blower Uses, Includes 2-1/4" Rings with 2-1/2" Adapters
Technical Data:
| Application | HVAC, Direct Drive Propeller Fan |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| HP | 1/4 and ½ |
| Nominal no-load rpm | 1200 |
| Voltage | 115 |
| Hz | 60 |
| Phase | 1 |
| Duty | Continuous |
| No. of Speeds | 2 |
| Certifications | UL Listed or Recognized, CSA Certified |
| Frame | 48 type or nearest equivalent |
| Motor Service Factor | 1.00 min. |
| Max. Ambient Temp | 40 Degrees C or higher |
| Ins. Class | B or F |
| Motor Mounting Position | All Angles |
| Motor Bearings | Sleeve or sealed bearing |
| Motor Thermal Protection | Auto reset |
| Motor Shaft Rotation | Bi-directional CW/CCW |
| Shaft Dia. | 1/2" |
| Shaft Length | 2" min. |
| Motor Shaft Design | Flat |
| Capacitor | To be included with motor |
| Nominal RPM Range | 1000-1175 |
FAQ
1. What are your prices?
Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.
2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense.
3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4.What is the average lead time?
For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5.What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal: 30% deposit in advance, 70% balance before shipment.
