Product Description:
Construction: The condenser in the VOLVO S40 2.4T 10 BEFORE/2.5T OLD typically incorporates the following components:
- Tubes: Heat exchange is made possible by refrigerant gas passing
through the small tubes in the condenser. These tubes are arranged
to maximize surface area and facilitate effective heat
transmission.
Fins: To improve surface area and heat dissipation, the tubes are
equipped with thin metal fins. By transferring heat from the
refrigerant to the surrounding air, they increase cooling
efficiency.
There are two refrigerant connections on the condenser: one on the
high-pressure side (inlet) and one on the low-pressure side (exit).
These connections let refrigerant to enter and exit the condenser
during the cooling process.
Mounting Brackets: The condenser is securely fastened to the car's
frame or radiator support using brackets to provide stability and
correct alignment with other parts.