Chinese Manufacturer Small Earth Brick Making Machine Automatic
Clay Brick Machine
Introduction of Wangda JZ250 Earth Brick Making Machine:
JZ250 Wangda brand non vacuum clay brick machine is smallest models brick extruders.It is widely used in
small family brick owners.Suitable for family workshops. Also, its compact design makes machine operation
very easily. Therefore we are selling at least 128 sets per year to
over 12countries.
Advantage of Wangda JZ250 Earth Brick Making Machine:
1. This JZ 250 Brick Making Machine can match with 15 HP Diesel
Engine or 11 KW Motor for its power.
2. Strong applicability, lower energy consumption,the extruder only11 KW.
3. The raw material for making bricks can be soil, mud.
4. The JZ250 Brick Making Machine is the best choice for
solid bricks with small capacity.
Technical Parameters of the Wangda JZ250 Earth Brick Making Machine:
Type | JZ250 |
The configuration of power(kw) | 11 |
Power Engine | Electric or Diesel |
Products | Solid Bricks |
Daily production | 10000 pcs /8 hours |
Boundary dimention(mm) | 3000*1100*1300 |
Weight(kg) | 870 |
Raw material Of Wangda JZ250 Earth Brick Making Machine,
Send clay raw material to box feeder with loader. Send the clay raw
material to double-roll crusher for preliminary crushing .
Preliminary crushed material is conveyed to twin-shaft mixing
machine for adding water and agitating through belt conveyer.
Molding Process of Wangda JZ250 Earth Brick Making Machine,
The molding water content rate should be controlled within 16%-18%.
The vacuum pump will take out the air that entered into the
extruding machine together with pug. The vacuum extruder will
extrude the pug from machine mouth and then, carry out slitting
& parting according to the required dimension.
Brick Samples from Wangda JZ250 Earth Brick Making Machine:
Service of Wangda JZ250 Earth Brick Making Machine:
After-sales service is an important part of our brick machine
industry. After more than 30 years of development, our factory has
accumulated more experience in service to help our brick machine
buyers.
We provide the following services:
1. Provide customers with various brick-making equipment,
2. Provide process design, kiln design, workshop design and other
services
3. The company has a professional team of engineers responsible for
the installation, training, and technical instructions imparted to
our buyer by the clay brick machinery.
4. After the brick machine is running, we have a special
after-sales service department to provide spare parts to solve the
problems in the machine's operation.
Note: For small JZ250 machine,its easy installation and operation,
usually no need engineer to install for our buyers.