High Efficiency Face Mask Making Machine N95 / KN95 Mask Machine Easy Operation

High Efficiency Face Mask Machine N95 / KN95 Mask Making Machine Easy Operation

Machine feature:

1. This machine can produce 1-4layer mask blank. Size can be adjustable. Adjust range Length 125-180mm, width 80-110mm. Thickness of mask can be adjust. Length of nose wire can be adjust. Can change to extra size after chance sealer. Can produce single nose wire blank and double nose wire blank.

2. conveyor belt to deliver the blank. Fast speed, tidy collect.

3. Easy operation, stable produce and high efficiency.

4. With touch screen to operation full machine, speed, output, alarm, stop all can be set on screen, easy to operation and to see the machine statue.

5. Machine made of aluminium shaft, no paint and weld, beauty and clean.

6. Good brand motor, magnetic wheel with break, low noisy.

7. Ultrasonic to weld the blank. Can do customized logo.

Performance Characteristic:

Fish type mask machine is high degree of automation, Using PLC programming control and ultrasonic technology to stick the 1-5 layer PP non-woven, activated carbon filter material. It can do from the mask into the nose line, embossing, folding, trimming forming a special production process lines clear analysis, in the production of non-deformation. Besides, it can minimize the waste material and effectively guarantee the production of masks quality.. There is a waste recovery. Applicable to any environment.

Equipment installation and configuration requirements

(1) Equipment size: 5200mm (L) × 1500mm (W) × 1900mm (H);

(2) Appearance color: international standard titanium warm gray 1C, if there is no special instructions, follow this standard;

(3) Equipment weight: ≤ 1000kg, ground bearing ≤ 400kg / m2;

(4) Working power supply: equipment 220VAC ± 5%, 50Hz, rated power about 14kw;

(5) Compressed air: 0.5-0.7mpa, with a flow rate of about 300L / min;

(6) Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no combustible, corrosive gas, no dust (cleanliness no less than 100000).

Production Capacity :

1. Production Efficiency : 40-60ppm(Related to material tensile properties)；
2. Fold symmetry: +/- 1mm；
3. Equipment failure rate: 5% (refers to the failure caused by the equipment itself)
4.  

Specification: