High Speed Surgical Medical Kn95 Face Mask Making Machine With Earloop Welding

High Speed Automatic Surgical Kn95 Face Mask Medical Making Machine With Earloop Welding

KN95 mask equipment is the special equipment for the production of disposable KN95 masks.It can automatically complete the mask body molding,automatic nose bridge reinforcement, and automatic ear band welding.

It is the auto equipment which is used to the product of face masks,It suitable for the material of non woven fabric, activated carbon and filter material from 1-5 layers. The face mask machine will finish all the processing from the feeding to nose-clip fixing, edge sealing, cutting the finished products.

According to the different materials you use, the finished products can reach the standards as N95, FFP2, etc.This face mask machine has features as stable performance, high productivity, low error rate and easy operation, etc.

Machine features:
1. Adopt full servo control system, precise control, high speed, stability, seamless connection of various processing links, raw material entry, finished product output, fully automatic operation
2. The mask body is thermostatically shaped, non-destructive material, and the finished mask effectively filters particles and other components in the air
3. Integrated PLC design, adjustable speed, can only operate terminal design, friendly interface, simple operation

ZY-M900 mask machine realizes from feeding to finished product output Folding masks are fully automated production, the whole machine only needs one person to operate, the production capacity is 40-60 pcs /MIN

1. This N95 face mask machine is mainly used for N95 full-automatic production line of folding ear-hanging masks. After unwinding multiple layers of fabric, it will be rolled and rolled by rollers. Automatic mechanical length-feeding and cutting of nose bridge strips, and automatic positioning of nose bridge stripes Ultrasonic fusion welding;
2. ultrasonic automatic drilling, hole material centralized flow channel discharge;
3. automatic duplex displacement printing of trademarks;
4. left ear tape with automatic feed length cutting, automatic ultrasonic welding; right ear tape with automatic feed length cutting, automatic ultrasonic welding Automatic folding; automatic ultrasonic folding welding; automatic roll cutting and blanking; automatic outflow of blanks; blanking masks flowing out through the assembly line;
5. full automatic production of the entire process technology, good stability and high production efficiency;

Equipment installation and configuration requirements

(1) Equipment size: 5200mm (L) × 1500mm (W) × 1900mm (H);

(2) Appearance color: international standard titanium warm gray 1C, if there is no special instructions, follow this standard;

(3) Equipment weight: ≤ 1000kg, ground bearing ≤ 400kg / m2;

(4) Working power supply: equipment 220VAC ± 5%, 50Hz, rated power about 14kw;

(5) Compressed air: 0.5-0.7mpa, with a flow rate of about 300L / min;

(6) Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no combustible, corrosive gas, no dust (cleanliness no less than 100000).

Production Capacity :

1. Production Efficiency : 40-60ppm(Related to material tensile properties)；
2. Fold symmetry: +/- 1mm；
3. Equipment failure rate: 5% (refers to the failure caused by the equipment itself)
4.  

Specification: